Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by dziedzic
-
Legend Dial Tone Problem
The Legend is at release 7.0 v10.0. The T1 is a PRI from Pacific Bell. There's only one incoming T1. The second T1 is coming out of the Legend and then into the Multitech MVP2410. I believe the DIDs are being sent over to the T1 that goes out of the Legend via a non-local UDP. The words...- dziedzic
- Post #5
- Forum: Avaya: Legacy SMB Systems (Partner/Merlin/Spirit)
-
Legend Dial Tone Problem
Not using a barrier code has also been tried. Calls made with our without the barrier code in VoIP numbers go directly to the operator with a DID#? on the display when she gets them. When a VoIP extension is made using just the barrier code, we're at least able to get the 2 rings and then...- dziedzic
- Post #3
- Forum: Avaya: Legacy SMB Systems (Partner/Merlin/Spirit)
-
Legend Dial Tone Problem
I've had 2 different Legend technician companies work on this problem without any luck. We have a T1 coming into our Legend and then a second DS1 card with a T1 coming out of the Legend and going to a Multitech MVP2410 VoIP router. There's 600 DIDs going to the MVP2410 via the Legend T1 and it...- dziedzic
- Thread
- Replies: 4
- Forum: Avaya: Legacy SMB Systems (Partner/Merlin/Spirit)
