Recent content by dynamode

It sounds like the install did not complete therefore, when the server restarted none of the information was saved except the partition data. Re-install NetWare and overwrite everything as if nothing happened the first time and after you finish loading the drivers, creating partitions, volumes...

All you need to do is start your Netscape web server. I should start by default in AUTOEXEC.ncf but if not use NSWEB.ncf atthe console prompt. Joshua Rothschild j.rothschild@dynamode.com

What you are referring to is Novell's Management Portal. You will need the IP address of your server, the default port is 8008. They you will need a valid login, I think it must be ADMIN or equivalent. Joshua Rothschild j.rothschild@dynamode.com

First let me say that I am NOT a programmer (once upon a time maybe, but not now). That being said here goes... The book you need is NDS Developer's Guide published by Novell Press. It describes the I/O you need to get the values you want from NDS. There is a CD included with the book that I...

%STATION is the variable you are looking for. Joshua Rothschild j.rothschild@dynamode.com

No. ZENWorks requires a Novell client. Joshua Rothschild j.rothschild@dynamode.com

Until you get the message "Communications Established" on the Powerchute screen the UPS and the server are NOT talking to one another. You need to be sure that all the NLMs (AIO.NLM, AIOCOMX.NLM - with the proper settings) are loaded and the correct cable (not necessarily the one...

There is a product from Advansys, www.advansyscorp.com, called Formativ that has a macro that will export the GW Calendar & Addressbook to CSV. You can download a 30 day eval of the product befor you decide to purchase. Joshua Rothschild j.rothschild@dynamode.com

First, make sure that NetWare "sees" the new HDs . You need to load NWCONFIG, select "Standard Disk Options", then select "Modify disk partitions and Hot Fix". If you see the new drives there make whatever changes if any that are needed then save. If the new drives...

There is software from Powerquest called ServerMagic that will allow you to move an existing NetWare on one server to a new server. The software will also allow you to resize the partitions. Remember that you will need to change the lan and HDD drivers before you are able to boot the new...

There should be a folder for each user called Sent Items which should have all the items sent by that user. Joshua Rothschild j.rothschild@dynamode.com

First, I am going to ask what took you so long? I don't know of anyone that has done such a jump between versions but my experience upgrading to 6 from 5.5Enhanced was painless. But as a precaution I made multiple copies of the message store in case I had to restore (this is a good safety...

You are basically trying to make apples into oranges. Will Outlook be a front end to another mail server like Exchange? If yes, you need to look for a GW to MSExchaneg migration product. If not, the you are moving from a server central mail system to individual user mailboxes on each local...

See if loading NWTAPE.CDM in STARTUP.NCF, after the tape's SCSI driver is loaded, helps. I am surprised that your backup software did n'y install the right driver(s) when you installed it. Joshua Rothschild j.rothschild@dynamode.com

Every time I have run into this problem it has always been that user context is not used. This means you need to explicitly enter "cn=admin.o=xxxx" then the password at the prompts. When appling a service pack NetWare assume that the user is working from ROOT of the tree and at the...