Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by DV21

  1. DV21

    terminal monitor adjustment?

    It is a MAX 900 terminal monitor. It's the same model as the one that died. I tried F3, but I can't see the prompt. Is is there a setting on the CS1000? All the spare monitors came up this way. Thanks for the quick response-
  2. DV21

    terminal monitor adjustment?

    We have a CS1000, stand alone for upgrading phones before distribution. The terminal monitor died, we had some spares but the screen always comes up short and wide, I can't see the prompts off the left side of the screen. The monitor only has brightness\contrast adjustment. How can I adjust the...
  3. DV21

    Upgrading 12xx series

    Thank you
  4. DV21

    Upgrading 12xx series

    I was told that the firmware for 3900 series phones is part of the CS1000's OS. Is this also true for the 1200 series IP phones? Currently it upgrades them to C60. We'd like to upgrade them to C8G, do I have to upgrade the CS1000's OS or can I load the bin files on it somehow? Thanks
  5. DV21

    3300 ICP Stale Tasks

    Our system has two of Mitel p/n 50002979, it would make a lot of sense. We purchased another 3300 controller, but it didn't come with those modules. I tried booting it with one or the other but if the config needs both, then I need another. Any way to tell which mmc slot is giving the problem to...
  6. DV21

    3300 ICP Stale Tasks

    Oddly the first time I tried to boot it today after the weekend it got far enough to bring up the web page which I copied some of the logs and alarm details to a text file. That time it didn't reboot but the critical light kept blinking. At that point I thought the critical alarm might be...
  7. DV21

    3300 ICP Stale Tasks

    Thank you, I'll give it a try.
  8. DV21

    3300 ICP Stale Tasks

    Looks like the task with the issue might be "E2T_VPKtFwd" Now what to do with it...
  9. DV21

    3300 ICP Stale Tasks

    How do I get to the logs when it doesn't boot? Can I get to them from VxWorks prompt?
  10. DV21

    3300 ICP Stale Tasks

    I have a 3300 ICP that keeps rebooting because of a critical error due to stale tasks. I did successfully reload the 3300_icp.tar file from backup. Still has the same issue. I don't know how to find the log to tell me which tasks are failing. I can only get to the VxWorks prompt to manage...
  11. DV21

    M390x upgrades on CS1000

    Got it! Even though the IDU showed that it was a 3903 the ports were all set as 3904's. Had to use ld 97 fdl to configure some of the ports for 3903's Thanks Curtismo!
  12. DV21

    M390x upgrades on CS1000

    I grabbed a 3904 and entered fdls, it started upgrading which made me feel a lot better. I thought the CS1000 wasn't upgrading anything. I thought the 3903's were similar enough to get the same firmware. It's helpful to know that it doesn't. I had been out for two days, when I came back the...
  13. DV21

    M390x upgrades on CS1000

    Thanks for the quick response- The IDU <TN> response is TN ID CODE M3903, so it does match The FWVU <TN> response shows that it has version 080 Our CS1000 is running 6.0.0.18, the 3903's should at least upgrade to 9.0 right? Again thank you very much-
  14. DV21

    CS1000 Timeout?

    For kicks I'd like to try to create a new account. Which load would I use? LD 17?
  15. DV21

    CS1000 Timeout?

    Sorry the system isn't connected to a network, only managed by a dummy terminal. I had to do some phones upgrades which held things up. I said the same thing about having to reboot when my predecessor told me about it, but now I think I know why- I noticed after the last reboot/login that once...
See more

Part and Inventory Search

Back
Top