Recent content by dulem

When I configure point-to-point ospf is not establishing at all.

Hello Guys I have very strange problem to setup very simple OSPF between 3 routers in hub-spoke scenario. Here is config from hub router in main office: interface ATM0/1/0 no ip address ip directed-broadcast ip pim sparse-mode no atm ilmi-keepalive ! interface ATM0/1/0.1 point-to-point ip...

Hello I think that I want to do something impossible but want to check with you guys. I need a directory number on CM 4.2 that will automaticaly play MOH. I tried to redirect to park number but this not worked. Any idea, suggestion ... P.S. I can't install CRA and IPCC for this

Hello I have configured new Unity connection 2.0 and have small problem. I.e when I call arrive and it is forwarded to the vm directly (at off-hours) caller hear Sorry before hear personal recording and I can't find way to remove this system recording. Any idea ?

Hello I guess that you have connectivity between cisco call manager and the VG200. The only thing that can be there is DNS settings. Ensure that you use proper DNS servers and that name and domain on the vg200 match callmanager domain name. Hint: to see what is going on wire run network...

Hello Is somone managed to install Unity on 2k3 server that is not cisco approved ? Any tip ? Thank you

Hello I falled with same problem couple months ago. The only solution is to ask from cisco to get 4.2.3 installation CDs (or find them somewhere) Regards

Hello, I am having problem with VM MWI function. Problem is that when I dial MWI ON/OFF numbers I am getting busy signal and can't use MWIs. When I dial from the phone I am getting busy signal and lighs goes on/off but when this is done from 'real' VM system this doesn't work. ANy help is very...

Guys, Was someone able to install CCM 5.0 on generic PC. There is now Linux there. Thanks

Hi, I have on the c2811 router FXS and FXO ports - controlled via MGCP by CCM 4.1. I've assigned DNs to FXS ports - connected them to PBX and when user from legacy phones call this extension they receive dialing tone - and can further dial extensions on CCM. FXO ports are connected to PBX as...

I don't have CSS on the trunk. Just want to pass end of dialing sign via trunk to other CCM.

Hello, I'm wondering is possible to pass # to other call manager? I have 2 CM-s and not so developed dialing plans.[My area is not covered by cisco :-(. I want that when users from one CM call number 123456# this should arrive to peer CM with same pattern. Right now it come as 123456. I want to...

Yes - I've created logger database. I've also searched on cisco site and didn't find any reference related to this messages. Any other glue ? Thanks

Latest devicePack 4.1.19 solved this problem with BRI interfaces on 2811 router. Cheers Dulem

I have 4.1.(3) CCM with latest device patches. Dulem