Recent content by DukeSSD

In route table the default should be its local address - 10.168.1.205 Default gateway should be your router - 10.168.1.1 The 8.x.x.x thing, no idea ;0) HTH

AIX 6.1 is out of support, it ended in April 2017. Your AIX TL/SP, TL09 SP04, was released 3 years ago, week 41 of 2014. Why was TL06 recommended, was an APAR identified, if so which one? You might find a fix in the last AIX 6.1 release, 6100-09-09 released in April 2017. Or you could update to...

?

It's not an IBM server problem, or it would be shouted about all over the place - and fixed by now... What OS are you trying to download it on?

Are you root? ulimits? looks like the command argument is too long so it's a limit / ulimit problem, maybe... HTH

Yeah, and with all that, what do you propose? Bump it to a queue depth of 20 for each lun, with 50 luns on a vscsi adapter - and then sit and watch as they don't configure... Sorry, not sure I get your point. If you want max transfer, bump the queue depth, just make sure you don't max the...

Yeah, VIO fibre adapters can do npiv, vscsi and local luns all at the same time, just don't put a tape device on them ;) No idea, this is an AIX forum ;)

Depends on how many VTDs are mapped to the adapter. Queue depth of 3 on a vscsi client disk gives 85 luns per adapter with dual VIO, and a couple left over for the vsci frame work - vscsi limit is 512 - dual vio, 85 luns, three queues per, you do the maths... Less luns will let you have more...

The vscsi disks are native to AIX, no HAS required. The queue depth of 3 is default. DON'T mess with the attributes if you cannot make similar changes on the VIO or you may lose the disk access...

It knows it's time as an off set from the system time. Doesn't matter what the system time is. System time is epoc +something, LPAR time is systime plus some off set.

You'd be much better off using a supported method, like a mksysb migration. You'll probably need IBM support to learn how to hack out all the old stuff from the ODM to make it behave correctly but they won't help because you didn't use a supported method of migration. Good luck.

What are the I/O errors? Maybe the sense data will give a better idea of the problem. This book gives a good overview and details of decoding the error sense data: http://publib.boulder.ibm.com/systems/hardware_docs/pdf/234329.pdf

Not really sure what you are asking for... If you do not have the man pages installed you can read them online: http://www-01.ibm.com/support/knowledgecenter/ssw_aix_61/com.ibm.aix.cmds.navigation/alphabeticallistofcommands.htm?lang=en For the find command...

Hi The SDDpcm kernel extension is not loaded because no compatible devices were detected or configured. This is normal for a system with SDDpcm installed that has no associated devices. The extension is not loaded because there is no need, there is nothing for it to do so it does not load. The...

Given the total PPs are the same but the free PPs are different, I think we have two questions... Check out: lsvg -l rootvg If it is mirrored then each PV should have twice as many PPs as LPs (might just be a dump device - they should not be mirrored. if you have one with a mirrored...