Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by duffy4476

  1. duffy4476

    D Channel

    There seems to be no errors showing, and it never shows a red alarm or down, this has been happening for about two weeks. I have replaced the PRI card, D-channel, and clock control to know avail. Usually when the link goes down we get errors on both sides. As stated earlier the whole building...
  2. duffy4476

    D Channel

    I have been getting this error to one of my remote locations which hold a option 11c. But I do not get it on my main site. We are currently having issues receiving fax's to that building as well. Anyone seen this error before? DCH: 5 EST N(R) REC TIME: 10:20:50 16/12/2008
  3. duffy4476

    All call Forward a 2616 in software?

    I believe you have to out the set first, Then LD 23 REQ NEW TYPE ACD CUST 0 ACDN XXXX <----- Extension to go right to Vmail MWC DSAC MAXP 1 SDNB BSCW ISAP RGAI ACAA FRRT SRRT NRRT FROA NCFW XXXX <------ Vmail extension (Enter to the end)
  4. duffy4476

    NUMBER FORWARD

    Ok we are down again, just noticed something new when we call that building we never reach their vmail. if they do not pick up it will ring for awhile then silence. Anybody
  5. duffy4476

    NUMBER FORWARD

    Ok it came backup by itself, when it was happening there was no problem dialing the 29XX number. There was also a issue with vmail when you user pressed the message button they would have the same result, a pause then fast busy. I noticed the message button had been programmed on a ACD to the...
  6. duffy4476

    NUMBER FORWARD

    Hello all, I'm having a issue that we never had before. We have a remote option 11c that I have been forwarding over to another building which holds our option 61. Every time we try to make a call to the number we get a busy. We have about 10 numbers having the same issue. Anyone see anything...
  7. duffy4476

    Fax Issues

    Ok fax to fax in the same building works fine. I have no idea what is happening.
  8. duffy4476

    Fax Issues

    I will try the fax to fax, I was able to receive calls to a analog phone that I plugged in with no issue.
  9. duffy4476

    Fax Issues

    Hello all, I have been experiencing a issue with on of my remote PBX's which is a option 11c. For whatever reason every fax machine in the building cannot receive and faxes, sending works fine. When trying to send to those fax numbers there is definitely a communication by the sound of the...
  10. duffy4476

    Problem with automated dialing

    TN 004 0 12 10 TYPE 2008 CDEN 8D CTYP XDLC CUST 0 FDN 2092 TGAR 0 LDN NO NCOS 7 SGRP 0 RNPG 3 SCI 0 SSU LNRS 32 XLST CLS UNR FBD WTA LPR PUA MTD FNA HTA ADD HFD MWA LMPN RMMD SMWD AAD IMD XHD IRA NID OLA VCE DRG1 POD...
  11. duffy4476

    Problem with automated dialing

    I have a question wondering if anyone has had this issue. First let here is what I use Meridian option 61c. I had set a bunch of people up in a office, and they communicate with allot of vender's. They usually call 1800#s and get automated options press one for this and two for that. When they...
  12. duffy4476

    Issue with 2616 incoming call pickup

    I have a question wondering if anyone has had this issue. First let here is what I use Meridian option 61c. I had set a bunch of people up in a office, and they communicate with allot of vender's. They usually call 1800#s and get automated options press one for this and two for that. When they...
  13. duffy4476

    PHANTOM TN ISSUE

    Turns out i have them on a ACD on 2900 and the were all set to make busy thats why I got the VM thank you.
  14. duffy4476

    PHANTOM TN ISSUE

    Hello, I'm having a issue with a phantom I created to forward all calls to another dn. The issue is, it will not ring on 2900 but go straight to 2900's voice mail. I would like it to ring on 2900 before it goes to vm. Any ideas?? TN 061 0 00 01 PHANTOM TYPE 500...
  15. duffy4476

    Call forward issue using a ACD

    Eddie what if I change the revert dn in Meridian VM to 2657, will that work?
See more

Part and Inventory Search

Back
Top