Recent content by Dudbolt

Nope. They wont spend the money :( I'm considering setting up a workstation and letting users VNC to it via the Web....

Can this be bought seperately? I've have been told by our vendor that you can only get this as part of Symposium Call Centre, it's not available on Symposium Express.

Folks, I have about 12 team leaders all wanting to have GRTD installed. Is there a product that would output to a web page? This would cetralise everything and be easier administrered than installing on indvidual workstations. The company won't upgrade to full Symposium so i'm looking for...

Hi folks, Jut wanted to say thanks for all the help and pointers. After some time, i found out the problem. The pix config was fine except for the DNS IP addresssing. These address's were given to me by BT and it seems that they were wrong. I changed the IP's and up popped the network! Many...

dhcpd dns ***.***.***.*** ? thats the correct command isnt it? Garrett

I took Cisco's default setup and was able to get the inside network able to ping out but it could not resolve any DNS address's. The Pix is conected to a SDSL router which is the gateway. Should i specify the DNS servers? I thought that the inside workstations should use the Pix inside address...

Ah, It's the old default deny thing again? I looked at the example Cisco Configs but they didnt show those statements. I'll give it a try!

I have spent a week trying to get a config to work, to no avail! Could someone put me out of my misery! I can ping the inside of the network and the internet from the pix but nothing can get outside! Regards Garrett ********************************************************* PIX Version 6.3(3)...

Below is the config from the router. Because of the legacy network we run a public internal ip range. Not good i know put resources are not provided to change this. I have removed the first 3 octets of the external ip's. ***.***.***.134 is the router address, ***.***.***.133 is the mail mx...

that might be a case sensitve password, try Cisco/Cisco. I think my 878 had that config. Garrett

Folks, I've used Cisco SDM to setup the above router. Everything works apart from allowing email traffic into the network to a mail server behind the router. The main router has an ip address of xxx.xxx.xxx.xxx and the mx record is one less than this. I used the NAT wizard to set up a static...

Guys, I have no experience with RAID or SCSI and this has been bothering me for a week. I have bought a Dell 2650 to put into a rack for some studying. The problem i have is getting Windows 2K to install. When the CD boots i have the drivers for the PERC and it loads these fine. The next step...

I have set up DFS for 7 offices. There is a share in each office and they repicate fine. The problem is how slow it is to read/write to the local dfs share! It's slow slow that word can crash trying to open and small file. If i set up a non DFS share on the same server it flies so i know it's...

Whats the address? problems@microsoft.com? Cheers Garrett

Hi folks, I have just been shown a good trick by a student on our network. Using a copy of NT4 User manager on our Win2003 network. The student logged in as himself[this is a well locked down account] Started up NT4 user manager and added a new account with Admin rights. He then went to the...