Recent content by dtracey

I am having a problem with the Skype for business add on. After it is installed I have the bar at the bottom of my SFB main window. However, when I click on a contact the black bar is not showing at the bottom of the conversation window...... Anyone have the same problem ?

do you have to use a shortcode to do a conference call ?

thank you. are you still using it ?

can someone point me to the documentation used for this ?

excellent , any chance of getting more info about it ?

@derfloh - i am not clear on what it is you did or how you did it. When you say SFB, do you mean SFB for Office 365 ? Are you saying you got it working with R9.1 ?

bumping again - has anyone got 9.1 working with SFB, or, can anyone point me to ANY technical info on doing it with 9.1 or 10 ?

just bumping this again as I really dont want to go to R10 just yet. Has anyone got IP Office R9/9.1 working with Skype for Business(Office 365)?

the latter unfortunately

Had a problem with 5 phones where they were updated with bad flash and now they all have the same address. The correct MAC is on the label on the phone, is there a way of programming the correct MAC back onto the phones without having to send them back ? It would seem its a simple enough change...

do you have an install document ? I have tried to install it on my laptop which is running win 10 and also using SFB on Office 365 and I get an error "The Avaya Microsoft Lync 2013 Integration software can only be installed if Lync Client x64 bit is installed

pretty sure it has to be R10

anyone got any documentation on it ?

worked out the problems. 2 errors by me. Error 1 - I had specified the RTP traffic as TCP instead of UDP. Error 2 - I had changed the Remote Call Signalling Port, so I changed that back. All is working now internally and externally.

i do. it all works if I use the default ports. but when I change the ports on the IPO to non default ports it stops working and when I run a packet trace on the firewall I can see the mobile app still trying to connect on the default port. So, I suppose the question is, how is the mobile app...