Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by dszacik

  1. dszacik

    Is there an SCCS for Linux?

    Thanks, we are reviewing CSSC.
  2. dszacik

    Is there an SCCS for Linux?

    We have a system we would like to port off of an HPUX box that uses SCCS, and am not finding a Linux version of SCCS. Any suggestions?
  3. dszacik

    3020 Switch fa0 port in HP Blade Rack

    Having an issue with one 3020 in an HP C-series rack. The other three I can get to management fa0 port via http and telnet from our LAN, switch number one I cannot access other than from systems on that 3020. Any ideas? Fiber uplinks to LAN on switches one and four. Config consistant (for fa0...
  4. dszacik

    ICB Users

    Having an issue where new users added to ICB cant log in. Is there a limit to the number of users? Default user password changed and dont know it? Try doing a password reset, and the password it says it has been reset to doesnt work.
  5. dszacik

    Backup size growing

    My CallPilot backups keep growing, even if we delete users or cleanup messages. Is there a compaction routine that should be run periodically?
  6. dszacik

    Dialing Shortcut Help And Suggestions

    OK, now whats the recommendation for building the CDP in LD 86 ESN? It looks to me like I would have 3 steering codes for MXSC, 71, 72 and 73. I would have 6 digits for NCDP, the 7X plus the 4 digits. Am I on the right track?
  7. dszacik

    Dialing Shortcut Help And Suggestions

    We have three remote non-Nortel sites. All have DID. I would like to be able to tell my users to dial 71 and the 4 digits for site A, 72 for site B, 73 for site C. Drop the two digits and insert the appropriate area code and exchange. I think that I have the DNB, the SPN and the DMI setup, but...
  8. dszacik

    adding TNs to OTM

    In Station Admin, View, Hardware. Edit, Add. Add the news hardware.
  9. dszacik

    DNS Change not Reflected in Object Selection Name

    How can I get NNM to reflect a DNS name change in an unmanaged object selection name? If I manage the object and do a demand poll it changes.
  10. dszacik

    Buttset for 3900 series phones

    We wired a couple of alligator clips to a jack, connect the clips to the field, and plug the appropriate 39xx set into the jack. Does this accomplish what you are trying to do?
  11. dszacik

    OTM

    You can use the report writer in station admin, select via a report filter where STATION->DIGS<>"
  12. dszacik

    Forward NO Answer/Hunt on 2nd line

    And you need to make sure that the number on key1 is defined in the Call Pilot Extension DN's for the voicemail account on key0.
  13. dszacik

    Router, Switch Module and PIX Config Issue

    I have a NM-16ESW switch module in my router. I'm beginning to think I might have been better off with an external stand-alone switch..... I now have the requirement to pass all of my traffic through a PIX. Can anyone come up with a configuration where all traffic from the switch module goes...
  14. dszacik

    DHCP and Switch Module

    This is why this forum is so great!! Another problem solved (self inflicted by forgetting to do a "copy run start" months ago when I first installed this router and trashed my notes).
  15. dszacik

    DHCP and Switch Module

    I need a little help on getting a user attached to a port on a switch module in my router to get a DHCP config. Int f0/0 gets the DHCP config OK (with the f0/0 address in the default route), so I think its the way I have the switch module configured. Config snippet: no ip dhcp conflict logging...
See more

Part and Inventory Search

Back
Top