Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by DScot

  1. DScot

    BCM 50 ICC - Holidays

    Hi Everyone, I have a client running ICC on a BCM 50 Rel 6.0. The issue they're experiencing is the Holidays set under Auto Attendant are not working for call center calls. The lines are set to go right to the call center skillset (they only have one). However, when a Holiday is defined and...
  2. DScot

    BCM450 reboots daily at same time

    I know the BCM 50's have a REBOOT Scheduler whereby you can tell the BCM to reboot daily, weekly or monthly. I'd look for that on the 450..... Bet that's the key!
  3. DScot

    PASS Basic and PASS Plus support. Does anyone aware of this?

    Yep, it's coming.... Nortel Legacy Customers who may want to retain Tier 3 or 4 support from Avaya for their Legacy Nortel PBX's that a new program is coming out called PASS and PASS+. In an effort to re-align itself and become more competitive within the industry, Avaya is examining many of...
  4. DScot

    MICS 6.1 (Non-XC) SW Upgrade to 7.1 SW

    Wow that easy eh? Cool..... Thanks for the quick info!
  5. DScot

    MICS 6.1 (Non-XC) SW Upgrade to 7.1 SW

    I am preparing to do my first MICS SW Upgrade. I see that an Upgrade Toolkit (cartridge) is needed for upgrades prior to 6.1 but see no mention of this cartridge needed for 6.1 to 7 or 7.1. Does anyone have step by step instructions for an upgrade from 6.1 to 7.1 non XC sw.? This would be...
  6. DScot

    Used CICS 4.2 no installer password

    Thanks Everyone.... I actually used the DEBUG procedure listed in the FAQ's and it worked great. Didn't have older SW card than that of the 4.2 I was installing. Firebirdscrambler helped me out with the daily password needed to get this done.
  7. DScot

    Used CICS 4.2 no installer password

    Firebirdscrambler- Not sure what you mean about using the fastrad or what you mean about the FAQ's. I can convert HEX Code but that's all I gathered from your help. If I installed a FastRad, what would that do for me? And or what is the date youu'd have me change the system to and then what...
  8. DScot

    Used CICS 4.2 no installer password

    Looking for help: A new customer of mine was given a system by a customer of their's. They asked me to install it, no problem. HOWEVER, the installer's password was changed, I was able to get in via system coordinator but that limits the programming on the CICS that I can do of course. So, I...
  9. DScot

    CLID not being seen

    That's the ticket - thanks everyone.
  10. DScot

    Phone not able to dial out

    Must be a set restriction - Are you sure they're not being restricted?
  11. DScot

    Change MICS 7.X from PRI to CI Trunking

    RIGHT ON Guys. I think the best is to do a new START-UP too. That way I can just program from scratch. It has a CP100 with it, so I'll go through that with not too much pain without starting over, I'll just kill the mailboxes and AA and start fresh. I appreciate the help - maybe I can return...
  12. DScot

    PRI dialtone

    In your original post, your speaking of PBX Tone, yes, PBX tone. Dial tone and PBX tone are 2 different animals. When you pick-up the handset, your hear what you think is dial tone - ITS NOT. That's PBX Tone. When you dial 9, the AC1 (Access Code) for PSTN dialing, you're opening up the...
  13. DScot

    VOIP HELP

    Look at my response in the Norstar Forum. VoIP is normally used simply for TOLLBYPASS purposes or to transport voice over data networks - " convergeance." Are you looking to do Trunking or Set based IP? The Meridian Options can do either. You first need to purchase and install a signaling...
  14. DScot

    Change MICS 7.X from PRI to CI Trunking

    Has anyone had to do this? Normally it's the other way around. Is it easier to just reset the configuration and start from scratch? Also, since the SW has the PRI Enabler SW, does this have to be disabled somewhere? Customer bought from another customer who had PRI and this one only has 6 1MB...
  15. DScot

    NAM Version required for MICS 7.1

    Get rid of the name and have them purchase a CallPilot system. Much easier to work with, and NAM's are EOL/EOS. I hear a lot of talk about NAM's in this forum and just don't get it. You can get CallPilot for next to nothing now. Go to Metrolinedirect.com for the best deals on Norstar gear...
See more

Part and Inventory Search

Back
Top