Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by dragondave

  1. dragondave

    computer boots to the startup screen then reboots over and over again

    I have a Window 98 peer to peer network. The machine is a Micro PC with Intel Celeron 533Mhz processor, 128 Mbit Ram. The PC begins to bootup to the startup screen then begins to reboot. It will go up to the startup screen twice then stop. The hard is good and the CD rom is good. It...
  2. dragondave

    Cloning Window 98 disk to disk with Ghost 2002

    How can I clone IDE 0 to IDE 1 using Ghost 2002. I IDe 1 installed on the secondary master controller. I have the A drive selected as the first boot device and boot seelk and boot sway are enabled, however the ghost boot disk is not recognized as boot disk during boot up. What should I do?
  3. dragondave

    Computer hangs during boot up

    Thanks for you help guys. I checked at the cards, no video card. The main board has on-board 128-bit 2D/3D 100MHz Host interface AGP Graphics Accelerator. I tried to reset the bios according the manual but monitor is still blank. The fan is working. Can I just instal a graphic card and...
  4. dragondave

    Computer hangs during boot up

    The first post should have read "can't get into safe mode or BIOS." Also, the monitor is completely blank.
  5. dragondave

    Computer hangs during boot up

    I have a machine that hangs during booting up. It's Win 98 second edition machine with an Intel Celeron 533mhz processor in a peer to peer network. I checked the hard drive it works fine in an identical machine. It hangs when it checks the CD-ROM, the LED stays on instead flashing. I can't...
See more

Part and Inventory Search

Back
Top