Recent content by Dphone

Try LUU instead of LUVU

Yes I'm using CPPM card SS. I thought the INI generates reboot of the software and the RST generates a hard reset of the card. Does the RST do the same as the reboot from the menu. Also is there a LD and a command you can do from a TTY port?

To reboot the Signaling server manually. Do you just push the RST button on the front of the card? What happen when you push the RST buttom? What happen when you push the INT button?

Rebooting the SS fixed the problem

I can logi into the CS. And I don't get the message " Logged in with an emergency Account

Has anyone else seen the error?

How did you fix this? I have the same problem and was thinking about rebooting EM.

Print and post the TN

Yes, that is what it sounds like.Still haven't had any buzzing still firmware upgrade about a month ago.

I started noticing the buzzing after our network people upgraded the firmware on the network(Enterasys). I'm stating to think the new firmware on network didn't like the older firmware on the IP phones. Since upgrading the firmware on the phones we haven't had any buzzing yet.

Was at "C7J" when it started happening. Went to "C8G" hasn't happen yet. Couple days ago took a couple of phones to "C8J". They working fine at "C7J" for a long time then all of a sudden the buzzing started.

This only happen on our 1120E phone. Since we uploaded the latest firmware to the phones about two weeks ago we have not had it happen again yet. So far this has stopped the buzzing.

I have some 1120E IP phones that every once in a while when the calls connects to the caller. (coming in or going out). the phone itself starts to buzz and locks up. The phone needs the power disconnected to stop the buzzing. The phone will then work ok when the power is reconnected. All the...

Ld 117 test alarm dta 011

We are on R 7.0 since the end of Dec.2010. Our M2616 work fine. Not having that problem.