Recent content by dosjock

Not to be a wise guy, did a google search turn up anything?

Set the preset forward for that line to the desired mail box and adjust the co forward time to suit your needs. sorry I did not ask which Starplus system you are working on but in general it should all work the same. Steve

Have you checked the CO ring delay timer? should be set to 5-7 seconds to allow for the cid info to be recieved

Have you verified that cid is being delivered by the telco? I mean installing a cid single line phone on the line/lines in question.I believe that by default cid is enabled on that system.cid display is system wide not, not subject to individual stations.

A new system probably is in order. You might want to look at PCS Digital/XBlue I know they used to sell systems that were compatible with Vodavi DHS phones.

Individual stations can change the ring tone, as well as turning it off. It's in the users guide. Steve

What voice mail are you using?

In admin programming, under "resource" look for KSU Version. Steve

Have done some work on this system, I believe there is a setting, perhaps in the maint section that can be set to do an automatic reset

This system uses time (seconds)for the CO preset. It is in Flash 40, on a per CO line basis.

Need to program, in Flash 24 the digital card in slot of the expansion ksu. Once you do that the system will have to be rebooted. Steve

What Starplus system do you have & what is the voice mail platform?

The STS phones have a built in headset jack on the side. (2.5mm mono) Perhaps you could hook into that to get to your amplifier. By default the headset option is not enabled. There is some system programming required as well as individual phone set programming.

Saw this over the weekend: "Just remember that mother nature always bats last

Try this first, access a mailbox (xxx) that is out of the range of stations that are actually installed. In that mailbox go to option 3, (personal options) select 4 for direct transfer, turn on direct transfer. Then on an installed station, program a flex button as 460xxx. In a CCR point an...