Recent content by donkc1

Hi, I have sucessfully installed an exchange 2000 server in a mixed environment with exchange 5.5. Our plan is to move individual mailboxes from 5.5 to 2000. I can create new mailboxes in exchange 2000, but when I go to exchange tasks, I don't have the move mailox option. What am I...

Hi, I have a server that has the OS drives mirrored Raid1. It has 3 additional drives setup as Raid5. These 3 drives are 72GB. The system was up, and running fine when I did this. I replaced each drive 1 at a time with 146GB drives, and let each 1 rebuild before I replaced the next. All 3...

Thanks, worked like a charm.

Hi, I have a legend setup as a key system with multiple lines. Is there a way to configure unused keys on extensions to light when another extension is off hook? Any help would be appreciated. Thanks, Don

Hi, I have a server that was originally running nt40. It has veritas 7.2 installed on it, and it was working fine. The server got upgraded to Windows 2000 server, and veritas continued to work fine. I had to uninstall veritas on the server to correct a problem. When I go to re-install the...

Hi Guys, After going thru all the options, I tried the centralized programming again, and this time it worked. I must have missed a step the last time thru. Thanks again to everyone for all their help. The extension is working fine. I hope everyone has a great holiday season, and I hope...

Hi, Same result with a different phone. I can call the extension, just can't get off hook system dialtone. I will check the programming again, but it looks identical to the other extensions that work on that board. This extension did work, and when do a test on that extension from another...

Hi, I have tried this phone at different locations on the same board, and it works fine. I will try another phone at ext 18, but I suspect I will get the same result. I will let you know. Thanks

Hi, Ok, I tried what you suggested, and no go. As another test, I added an outside line to the extension, so when I go off hook, I get outside. I dialed a call, and then flashed on that extension. It put the call I had on hold, and gave me inside dialtone, so I know the port is good. I...

Where does this get changed. I am having the extact same problem. I can't map a drive from WIndows XP. THanks

Hi, I have a 016 TRR board. I have the first port on the bottom as ext 18. WHen I bring up WinSPM, no matter where I select a system access button, I get no system dialtone. If I call the extension from another one, it rings, and I can pick it up. I used to be able to get system access...

Is there a module that can be used for analog phones that will pass caller id info thru? Thanks

Ok, I will look around for one, but in the mean time, if I put the cordless phone on the CO line before the legend, I will get the caller id information. If I do that, is there a way that the legend can detect that the line is off hook, and reflect that on the MLX10D sets? Thanks again...

Hi, I have a merlin legend with a CKE3 R7 V12 processor. I have an 008 MLX module with MLX10DP phones. An 800 GS/LS-ID card, and an 016 module for T/R phones. I have a regular cordless phone that is caller id capable. I have the cordless plugged into the 1st port on the 016 card. The...

Hi, I have a strange problem. I published an access application on citrix. When the user logs in to the web interface, opens the application, and selects the function that uses the sendobject, it works fine. If they try, and use it from a thin client, they get a message that says the...