Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by dneis

  1. dneis

    DISA

    Hello, does someone have a tutorial to configure the DISA function in hipath 4000 v5? I have configured a SIP trunk with an asterisk system and need now to have the DISA function working over this SJP trunk. Any help would be appreciated Regards, Denis
  2. dneis

    Night Mode with EVM

    Hello THere, thanks for the answer Regards, Denis
  3. dneis

    Night Mode with EVM

    Hello, Thanks for your answer, I used a physical phone yes (ext. 102). I am using Manager E to do this programming. When it is in night mode, i have configured in Incoming Calles->Ringing assignment per line my 102 extention as Night call no. Regards, Denis
  4. dneis

    Night Mode with EVM

    Helo, I have configured a night message on a box with the EVM for an extension and a forward. I have few questions : - How can you configure the default night mode to an extension when you dial *44 ? or in other word what is the night mode default when you dial *44 and the system prompt for...
  5. dneis

    IP Trunking HiPath 3000 and HiPath 4000

    Hello There, Thank you believe it or not, after a night of good sleep , this is working this morning, without touching anything.. so I don't understand but it's working, so another 49 H3K to configure :-D Thanks again for your time, Cheers, Densi
  6. dneis

    IP Trunking HiPath 3000 and HiPath 4000

    Hello Simon, I have 50 H3K IP trunking to configure with one 4k, and this one was with a test Lab. I just ran into the configuration of a production H3k in france that were configured by a Siemens partner. All is ok but when I tried to dial from the 4k to the 3k, it does not work I have a not...
  7. dneis

    IP Trunking HiPath 3000 and HiPath 4000

    HEllo There, It's working now, I was missing a parameter in cgwb :-) gkleg. Thank you so much for your help! Cheers, Denis
  8. dneis

    IP Trunking HiPath 3000 and HiPath 4000

    Hello Simon, Thank for the help, I configured it as a tie. One thing , do you put the IP address of the HG1500 or of the 3000? I configured with the IP Address of the HG1500, like in the doc. ADD-LDPLN:LCRCONF=LCRPATT,DIPLNUM=0,LDP="374"-"999"-"11",LROUTE=999,LAUTH=1,PINDP=N...
  9. dneis

    IP Trunking HiPath 3000 and HiPath 4000

    Guys, thank you very much for your help ! I configured my h4kv5 and h3kv8 the best I can with those doc but got a please try later when trying to dial on the 4k, I ran a diagnostic ISDN trace on the IP Trunk but can't see anything (no setup etc...) my gw seems to not register neither...
  10. dneis

    IP Trunking HiPath 3000 and HiPath 4000

    Hello, Anybody has already configured an IP Trunking with the 3300 and 4000? if yes, any documentation? Regards, DEnis
  11. dneis

    Mediatrix AP1120

    Hello, the one we have are using SIP firmware, you can change the firmware from Cornet to SIP for the 3000.
  12. dneis

    HiPath 3000 CDB FTP?

    Hello, Thank, in fact there is a Metamanagement application RSM for the 3000 familly, but it's submitted to licences.. I am waiting for the pricing... will see. Cheers
  13. dneis

    HiPath 3000 CDB FTP?

    Yes, Backup purpose, but I don't want to do it manually, we have 55 HiPath 3000 and no time to do this manually. Cheers,
  14. dneis

    HiPath 3000 CDB FTP?

    Hello, I am looking for a way to automate the extract of the KDS or CDB of the HiPath 3000. I would like to write a script, but is there a way to get the CDB with FTP or TFTP? I sniffed the network with HiPath Manager E and the protocol used for file transfert in on port 7000, but proprietary...
  15. dneis

    MOH on HiPath 3500 v8

    So here is what I did - in station created extension 997 on a 4SLA 3-4 port - in station view->activated feature selected External MoH in extension type - Auxiliary Equipment->ext connection drag the 997 onto the external MOH table - then in EVM mailbox 1 added 997 but I have not tested yet...
See more

Part and Inventory Search

Back
Top