Recent content by DManigo

Thanks for replying. I blew away the config on the C1751. This is the current config: Current configuration : 1325 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! boot-start-marker...

I have a Zyxel 645r fully bridged and connected to a Cisco 1751-v4. I replaced the DSU/CSU WIC with an ethernet WIC. Here is a short description so far. ip subnet-zero ip dhcp exclude-address 192.168.2.1 ip dhcp exclude-address 192.168.2.5 ! ip dhcp pool 5thborocs network 192.168.2.0...

Has anyone ever fully bridged a CIsco roter and connect the bridge interface to another Cisco router using a CSU/DSU WIC? Is it possible to even configure even if you have a static IP address?

The Zyxel 645r will be in full bridge mode making the 1751-v the core router. C1751-V interfaces: 1 FastEthernet interface 1 Serial interface 4 Voice FXO interfaces WIC T1-DSU I will not need to configure the router as PPPoE because I have a static IP. Thanks for replying very appreciated.

Network Diagram: Zyxel 645 (Full bridge)->C1751-V (configuring CME)-> C1900 switch I have have a static IP from my ADSL provider. Current Cisco 1751 IOS (c1700-k9o3sv8y7-mz.124-5a.bin). Does anyone know of a link I can read describing how to configure the interfaces for internet access? Here is...

I have a corrupt flash on a cisco827-v4 router. When I try to load a new IOS via tftp (tftpdnld to be exact) this is what I recieve: rommon 3 > IP_ADDRESS=192.168.1.9 rommon 4 > IP_SUBNET_MASK=255.255.255.0 rommon 5 > DEFAULT_GATEWAY=192.168.1.1 rommon 6 > TFTP_SERVER=192.168.1.5 rommon 7 >...

I have a Cisco 1751-4v router without an IOS image. I used the xmodem protocol to upload the IOS (c1700-sv3y-mz.123-17a.bin). The load seems to run succesfully. After returning to a command prompt ( router> )if you relaod the router, it returns to back to rommon (rommon>). Now the image is still...

Problem: others can get to the website from WAN but I cannot access the site from a web browser from the LAN. When I type in the url (www.elegantoccasions4u.com) from the LAN, I am routed to a google search page. This is my first time hosting or working on a website ( my wife's site so I am...

I am also running into a problem with Windows Media Server for 2k3 server. I ran a search, you may find some useful information here...

After upgrading the IOS on a C827-4v, this is what I get: System Bootstrap, Version 12.1(1r)XB1, RELEASE SOFTWARE (fc1) Copyright (c) 2000 by cisco Systems, Inc. C827-4v platform with 24576 Kbytes of main memory program load complete, entry point: 0x80013000, size: 0x68f6a4 Self decompressing...

Cisco 1751-v4 ref. http://www.cisco.com/en/US/products/hw/routers/ps221/prod_configuration_guide09186a0080099429.html According to Cisco, the router comes default with Flash memory of 32mb (non-upgradable) and 96mb DRAM. The maximum DRAM is 128mb. Under "Table 2 Cisco 1700 Series Router...

the switch is an C1900 series.The 1751v4 will only be configured with the CME IOS and handle Voice protocols only. My goal is to have everything (VoIP and internet access) route through the C827. Hope this helps

PowerEdge 1420 server running Win2k3 server. I started noticing IE v6 will shutdown on it's own. Event viewer states it shutdown unexpectedly. Microsoft does not have an answer for the shutdown (knowledgebase)or not enough end-users reporting the problem. I cannot find a way to completely remove...

Log in as administrator, computer management, disk manager, select the drive and assign a drive letter. The same thing happened to me when using an external HD for backup.

Sorry, I guess you would need this information too.. bridge irb ! ! interface Ethernet0 ip address 192.168.1.1 255.255.255.0 ip nat inside hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive pvc 8/35 encapsulation aal5snap ! dsl operating-mode auto bridge-group 1...