Recent content by dmandell

You probably already have the correct file on the system and may not know it! It is X272_S10K7073F10.NA07.LOD Best regards, Dana

xmsre, thank you for the reply. No the Windows client side firewall would not be a suitable way to control traffic from the Exchange server. Zelandakh, Thank you for your reply, (Please remember to fully read the question before offering a reply.) I need to allow non-secure IMAP4 for one...

We recently migrated from Exchange 2003 to Exchange 2007. We are now requiring secure IMAP4 for all non-Outlook users (PDA, etc) So far, all good, it's all working. (even the IPhone users) But... We have an automated VB script that pulls mail from a special mailbox on the server to create...

We have a problem where Adobe Framemaker 8 is installed on a computer. We need to install Acrobat Standard 8 (not reader 8) to get certain functionality found in Acrobat STD 8 (that is not part of Framemeker) Unfortunately, If one attempts to install Acrobat 8 Standard, the install fails with...

Here is the answer from EMC. Replacing a single drive (500GB --> 750GB) will not yield additional usable space, as space is allocated at the RAID group level. That is, if you had a RAID 5 grouping of 5 drives, the size of all 5 of the drives in the RAID group would need to be increased, such...

Do you have a set of working disks right now? The easy way to do it is to fire up a working system and then pull one system disk. Then put your fresh disk in that spot and wait for the rebuild to complete. When complete, do this with disk next disk in line. Be sure to label the position of...

We have an AX150i with 500gb drives. The disk pools and virtual drives are all setup and running, etc. If I want to upgrade the drives to 750gb drives, what happens when I replace a 500gb drive with a 750GB drive? (pull out a 500 and stick in a 750) a. The "extra" space will just show as...

...And the answer is. Group Password = Pre-shared Key. I guess Cisco thought that users would be confused by the term "pre-shared key" so they used "Group Password" to mean the same thing. I knew it had to be simple!

Cisco ASA 5520 v7.1 group password setup This should be a simple question. I'm new to Cisco, but not VPN. I went throught the VPN wizard to setup a simple site to Cisco (Windows) client VPN (version 4.8 ) After setting up the ASA and client side settings, when trying to connect, it asks for a...

I was running Groupshield 6.0.0 that was an upgrade from a version 5.x., We then decided to do a fresh install of 6.0.1. i.e. completely uninstalling the 6.0 version before installing the 6.0.1 version. Everying is fine and it is running well, but the alerting is no longer working in HTML...

We have one Exchange 2003 mailbox that has errors in the unread message counter. (it reads 57 unread messages when all have been read) (It got that way because of a known Outlook bug with Outlook 2000 that causes this to happen when two clients routinely connect to the same mailbox at the same...

BTW, also be sure your Outlook client is set for "basic authentication", not the default of NTLM. Dana

Have you checked the following? In IIS service manager, open the default website and right click on the RPC virtual directory and select properties. Click on Directory Security tab. under Authentication and access control, hit the Edit button. Be sure that the box for Basic Authentication is...

Yes, I had forgotten to install SFU on the domain controller. Something that is in the documentation, but not stressed. This is required for it to work correctly. Dana

Salvatore, did you ever get this to work? I'm still having a similar problem. (see thread above) "Cannot get NIS to AD domain user mapping to work with SFU 3.5" Thanks, Dana