Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by dkluth

  1. dkluth

    Static Route 3745

    I need other 64. addresses to get out to the internet. They need to be directed to my internet connection which is the 0.0.0.0 192.168.150.3 route. Thanks, Doug
  2. dkluth

    Static Route 3745

    Ok, here goes. The no auto-summary didn't solve the problem. Here's what I am trying to acomplish. That single IP 64.14.***.** must arive at my ASA5505 as someone from my internal network tring to FTP to 64.14.***.***. In other words, source 192.168.150.100 ftp to destination 64.14.***.*** ftp...
  3. dkluth

    Static Route 3745

    Hi, I am running eigrp. Here is the routing part of the config. I really just don't understand this. It's driving me nuts. What am I missing? router eigrp 10 redistribute static network 192.168.1.0 network 192.168.111.0 network 192.168.112.0 network 192.168.116.0 network 192.168.121.0...
  4. dkluth

    Static Route 3745

    Thanks, but it is redirecting any ip address that begins with 64. to the asa. We have three different companys we work with that have 64. addresses and with that in place the ASA gets the traffic. Any ideas why? Thank you, Doug
  5. dkluth

    Static Route 3745

    Hi Guys, This is driving me nuts. I have a 3745 that I need to add a static route to. I have two routes that this concerns. One is my default g/w route. 0.0.0.0 0.0.0.0 192.168.150.3 This route allows my router to send all unknown traffic to the internet. I have another route that I need to...
  6. dkluth

    ASA VPN problems

    Management wants it inside of the firewall. So I guess that's my cross to bear.
  7. dkluth

    ASA VPN problems

    Ok, here's what I'm tring to do.On the remote end, (they told us what we need) they have a cisco vpn concentrator. We purchased a cisco 5505. We need to be by corporate f/w, behind our main firewall. So on the inside we have a class c network. 192.168.0.0/16 . They have give me two ip's. Their...
  8. dkluth

    ASA VPN problems

    Hi Guys, Well, I am new to ASA. I have been usin Cisco routers for years and I have a Checkpoint firewall. Here's what I need to accomplish. I have an ASA5505. I have a vendor that has provided a VPN Peer address and a FTP server address. Here's where it gets tricky. The ASA is inside my...
  9. dkluth

    Caller ID

    Hi Guys, I am trying to figure out why the first 2616 has caller ID and the second does not. Any help would be greatly appreciated. We are on rls 25.4 with Symposium Express 4.0. DATE PAGE DES DES ADMIN TN 014 0 00 15 TYPE 2616 CDEN 8D CUST 0 AOM 0 FDN 7000 TGAR 1 LDN NO NCOS 6 SGRP 0...
  10. dkluth

    Caller ID

    Hi Guys, I am trying to figure out why the first 2616 has caller ID and the second does not. Any help would be greatly appreciated. We are on rls 25.4 with Symposium Express 4.0. DATE PAGE DES DES ADMIN TN 014 0 00 15 TYPE 2616 CDEN 8D CUST 0 AOM 0 FDN 7000 TGAR 1 LDN NO NCOS 6 SGRP 0...
  11. dkluth

    Configuring 2801 with VWIC 2MFT-T1

    Hi Guys, This pertains to programming a Cisco 2801 with a VWIC-2MFT-T1. I am replacing an old router with a serial card and an Adtran CSU/DSU. The ADTRAN states that it uses these settings. DS0 1-12 NX 56-64 DS0 13-24 DSX-1 How would that translate to Cisco programming? It is a 2801...
  12. dkluth

    Disabling an ITG card to Upload FW

    Ok, they may seem dumb, I have three cabinets. I need to know how to figure out card numbers. The manual says disc s c, what does this mean? Sorry, Doug
  13. dkluth

    Disabling an ITG card to Upload FW

    Hi Guys, Here's an easy one I hope. I have an ITG card I need to disable to FTP IPL30502 to the card from OTM. It says FTP failed when I try to transmit the software from OTM but then it says the card needs to be disabled in the help. Anybody familiar with this procedure? Any procedures or...
  14. dkluth

    AACQ and CDN

    Hello, I am trying to setup a new CDN for our Symposium Express call center by copying a previously setup queue. However, AACQ does not come up. Does anyone know how to make that prompt come up? Thank You, Doug
  15. dkluth

    F/W Download

    The PBX is on 25.40 OTm I am not sure of. The CS1000 is at a different location than the Option 11 25.40. I figured out how to upload the firmware using OTM. Now I just need to figure out how to get the firmware of off of the CS1000.
See more

Part and Inventory Search

Back
Top