Recent content by Djarum

Is there a way to disable dtmf tone recognition inside of meridian mail? I have a mailbox that people are getting to and hitting 0 and getting out of. Due to business concerns we can't have that happen. Can I change something so that mermail ignores those key presses. Thanks in advance

Thanks a ton, That was exactly what I was looking for!! Djarum

Hi, I want to set up a collect 4 digits and route to digits vector step in on of my vectors. My question is that I want to route to an extension if the caller puts in the extension, but if they don't I want it to go to the route-to in the next step. If i put a "collect X digits after...

I have 5 2950ts in the same rack...All have their own IP...I have them clustered but so far the only thing that i seem to gain is I get a graphic view of all the switches in cms... Is there anything else? Do changes I make globaly on the command switch propagate to the others? TIA Chet

sorry my config didn't show the running config for the port this is one of the linux ports config interface FastEthernet0/10 switchport mode access no ip address spanning-tree portfast end the dhcp "server" is actually a pix 506 handing off ip's and I dont knows...

I hope this is the config you are looking for....I'm a cisco neophyte but it doesn't look to descriptive to me.... Thanks for all your help, If you need a different config, let me know FA0/10 is the switch port that I enabled portfast on... Thanks again Using 1691 out of 32768 bytes ! version...

Thanks guys, I tried turning off spanning tree and it doesn't make a difference... I think the problem is still nics in the linux boxes choke when they get the dhcp reply throuh the cicso switches that have some type of vlan tagging.... When i plug the uplink of a hub or another brand switch...

I have a bunch of 2950t's. We recently changed over to an all linux live cd's for our work OS. If i plug into a switch port I cant get a dhcp ip..if i take any hub I have laying around and plug its uplink into the same cisco switch port I get a dhcp ip fine...I think its the vlaning on the...

Still having the issue, thanks for the replies, rtmckee my t1's were set to "6" yesterday and I changed them to "7" to try to fix it but still getting name. Thanks again

This seems to be the reverse of all the other questions everbody else is asking, but it starts the same way as everybody elses post... I got 2 new ISDN pri circuits and now.. I get name. My call center uses number far more than name and I was wondering how to switch so the phones show number and...

sorry the 7 fell out of s8700 while i was typing. thanks for all your help

one more quick question, medpro or mapd card, what are the plus and minuses of each and can i use either for this type of application. The cost of the mapd is 1/4 a medpro or is the mapd only for using a s800 gateway. thanks

I currently have a g3si in one of my locations and a Nortel option 11c which is ip enabled. What I’m looking to do is ip enable my pbx and for step one qsig into the Nortel. I have r11 and have the basic ip options turned on but am missing the hardware to get it going. I am looking for some...

I was wondering if there is a tutorial, primer or chart that lists all the feature access codes and what they mean, so I could discern how they would effect my call center. I have looked up in the avaya pdf and get information about changing them but not what they do exactly. has anybody seen...

The custpw password doesn't work but thanks for the quick reply. I want the password to connect with mailbox manager, but when I use the craft password it hangs waiting for the audix to get the enter keystroke for terminal type..I was wondering if the sa password would work in that case...and I...