Recent content by ditobot

I didn't know there was such a feature. Maybe I could set the ringer to off and bridge it with an analog extension and bring it back in over our 25 pair feed to a strobe. Do you know the exact feature name?

I should also mention that I have an S8300 Definity with 48 digital ports and 16 analog ports.

I would like to put a 2420 in a production studio at a radio station; however I have been unable to disable the ring on the phone. I need to completely turn off all audible ringing on the phone and send it to a strobe instead. I don't know if this is possible without tying up two stations...

We have a corporate domain controller and a local site domain controller. Our Windows 2000 server replicates with the corporate server approximately every half hour. Corporate recently set an account lockout policy after five incorrect logins. The problems we are having here on a local level is...

So the only way to utilize the 100s and 200s and so on is to disable direct extension transfer under the selector codes for 1 and 2 etc.? I will try to assign extensions in the 500 series and see what happens. Does anyone happen to know if I can put one touch transfer buttons on an adjunct for...

I have a client who is currently set up with the traditional 2 digit extensions and the voicemail boxes are assigned accordingly. Now they want to add phantom extensions for voicemail and with Partner Messaging R1.0 they are capable of far more mailboxes than extensions. If you assign a mailbox...

I have never had this problem either. The customer that this sytem belongs to knows just enough to be dangerous and I am trying to figure out what they could have possibly done. No red flags jumped out at me and I was just hoping someone else could recognize this problem. It is not a hunt group...

I have a Partner ACS 5.0 with Partner Messaging Release 1.0. I have assigned phantom extensions to the voice mail and instructed the the mail that there is no phone at this extension. However, when the receptionist performs a VoiceMail Transfer to one of these phantom extensions it works but it...

The problem you have is that the main Auto Attendant is a completely seperate domain from the personal voice mail boxes. The main voice mail (Auto Attendant) is what is designed to handle the fax routing. Once you bypass the main Auto Attendant by assigning a line to an extension (#208) the fax...

How do you permanently assign an extension to a calling group? Currently I manually log the extension into the calling group (status 2) by pressing #764 and entering the group extension which happens to be 771. I would like to have this extension remain logged into this calling group under...