Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by directxl
-
-
7044-170/AIX 5.1 install problem
Update: Bought a 4.3.2 (after, installed Fedora Core 4, but failed to boot up) and updated the CD microcode. Then, installed AIX 5.1. Now, I am on my way. Thanks all who helped or answered my thread. ps. No wonder 99% use Windows ;) -
7044-170/AIX 5.1 install problem
I really need aix 4.3.3. to upgrade the microcode. Can anyone spare or burn a set for me? I will pay the cost or help a 'programming task' in return. I am a very good coder for c++, java, c# among others, windows or unix. -
7044-170/AIX 5.1 install problem
hi p5, I made a diag cd and updated system/service firmware after booting with it. To update CD-ROM's microcode, I need to use 'web_microcode.bin'...Genucode to load the microcode (a bin file). But I dont know how to load/run the Genucode from diag cd boot session... -
7044-170/AIX 5.1 install problem
p5, Appreciate your effort. I will do the battery thing. Meanwhile, I think I will download and make that diag CD...maybe I could update microcode from there. Will post my result later, -
7044-170/AIX 5.1 install problem
p5, I tried to follow your steps. I could only get the small laptop sized grx card 90% out of the PCI lot, the other side seems bolted to the fan that I am not ready to break the whole motherboard apart, yet. Didnt take the battery out. I have a small metal uncover sometime ago, dont even... -
7044-170/AIX 5.1 install problem
btw, tried many times with combo of key presses and long waittings. At some point, I got this line: Preserving 25152 bytes of symbol table [lft_loadpin32] Without seeing that first, I powered off ;-) So now, I will leave it overnight to see if it will turn itself into a windows or .net or... -
7044-170/AIX 5.1 install problem
Here's my current status...I think the cable may be ok. After taking keyboard/mouse off, I got further on the HyperTerminal: /pci@fef00000/scsi@c/sd@0 RS/6000 Firmware Version SPH00221 (c) Copyright IBM Corp. 2000 All rights reserved... -
7044-170/AIX 5.1 install problem
PS. One COM port on AIX does not even do anything for the serial connection. Most of the time, I get 'ef1' on LED It got to be the cable ??!! -
7044-170/AIX 5.1 install problem
Finally got the cable tonight. It didnt come with any pin diagram chart. It's a female-female 9 pin. Anyway after I connected the cable to a windows desktop, opened the HyperTerminal application with 9600 8-N-1, I booted the aix, I see a message showed "System Powering on.". But....that's all... -
7044-170/AIX 5.1 install problem
Cool Duke! Will post my progress once received the cable. -
7044-170/AIX 5.1 install problem
Thanks Duuuuuke ;-) 1600x1200 looks fine with the dell monitor except very small font. Dont know why it wont pass the boot process, then it probabaly wont boot to 'diagnostic CD' either. So for now, I will try again with the serial cable once I receive it. Nothin is easy. -
7044-170/AIX 5.1 install problem
p5wizard, Looks like there's hope :-) The f1 (...f10) did nothing as I hit often. So I will see if the hyperterm would work, then harddrive & grx display. Thanks a lot. I will post back any progress soon. Dont know why 18G would not work from the empty tape drive bay. I read 9G may work there. -
7044-170/AIX 5.1 install problem
Just ebayed a cable like this one: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=64047&item=5782607820&rd=1 Hope it would do the trick. so far is just pain and no fun. Hope my non-ibm ultra3(U160) 18G scsi drive would not give me problem after the boot. -
7044-170/AIX 5.1 install problem
I have a graphics card came with the box(3000 something). I use a graphics monitor(WINDOWS) which boots up like 1600x1200 (or more) in SMS. mouse/keyboard are PC type. From this site 'http://www.bigredradio.com/firmware.html', I download the spflash.img, copy to a floppy and did a boot from...
