Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by DHRoger

  1. DHRoger

    Simple change of 7941 MAC addy?

    MAC address (hex) will only have 0-9 and A through F, the letter O will be invalid.
  2. DHRoger

    Can anyone help identify this type of wiring block?

    Back in the day, most telco installers took pride in their work, dressing all wiring with care. The terminal shown could be either a 104 or 116 type terminal. Likely 116 protector due to its location as a demarc of sorts. The ears were provided for strand mounting. The lid was spring-loaded and...
  3. DHRoger

    Can anyone help identify this type of wiring block?

    Most of the messy part appears to be CATV splitters and satellite dish grounding blocks. I feel your pain, though.
  4. DHRoger

    External calls don't go to voice-mail box

    Check the CSS of the FNA external.
  5. DHRoger

    BIX test probe???

    The magic of these, if all you need is a go/no test (Dial tone or not, since it's analog) leave the butt set switched off-hook and just go pair-to-pair. You don't even need to clip the retainers to hold it in place. It's a quick and easy way to bridge the connection. I agree with Engenius they...
  6. DHRoger

    MWI won't light on a phone

    Thanks for providing your findings and resolution. That will likely help others down the road.
  7. DHRoger

    MWI won't light on a phone

    If the email gets 'read' in Outlook, that will cause the MWI to extinguish and envelope decorator to disappear. It's starting to look like Whykap's observations above being valid. Try deleting the proxy address to remove the email from the equation.
  8. DHRoger

    MWI won't light on a phone

    I think my next step would be to substitute a different phone (on a different port) to rule out the phone/port.
  9. DHRoger

    MWI won't light on a phone

    In Unity, find the user, edit > message waiting indicators, the current status for the user's MWI will be indicated. If it states 'on' and the MWI isn't lit, the phone LED would likely be the issue.
  10. DHRoger

    Block Termination/ Cross Connect

    If you have an active TN on the same card, hopefully near your new TN, tone that line and that should get you to the right area, and count up or down from active TN. Bring the new phone to the cross-connect area and test from there, saves a lot of legwork.
  11. DHRoger

    Setting MWI on for system broadcast messages

    Yeah, I was hoping one of the gurus on this forum may have a work-around for this limitation. Their resourcefulness never ceases to amaze me. Thanks for your replies.
  12. DHRoger

    Setting MWI on for system broadcast messages

    Neither. It's a call handler set up so a user can call and send a voicemail message to multiple voice mail users as defined under 'system distribution lists'. The configuration is described in Chapter 26 of the System Administration Guide for Cisco Unity Connection Release 8.x. The product...
  13. DHRoger

    Setting MWI on for system broadcast messages

    Cisco Unity 8.5.1, when sending system broadcast messages, the system 'by design' doesn't set the MWI to 'on'. Has anyone found a work-around to this issue? Most people don't generally check their messages if the MWI isn't lit so it's hit-or-miss on who actually hears the message. I'm fairly...
  14. DHRoger

    Bad Cable Pair from CO?

    In a recent conversation with our local Verizon tech, he stated they are not doing any new copper cable installations and just performing as-needed repairs to their current plant. We have a 300pr cable servicing our bldg that was waterlogged. After months of musical chairs (pairs), the situation...
  15. DHRoger

    Is there a reoprt on the Call Manager that will show the Names and Extension

    That screen is good as far as a list goes, but it would be nice to be able to create a printable directory listing without playing the part of SQL admin.
See more

Part and Inventory Search

Back
Top