Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by dhauser

  1. dhauser

    IBM Director Agent 4.1.02 - twgmonit.exe memory usage

    I have just spoken with my manager and IBM Director 4.12 has went gold but customer web sight is not available. You can access most of the code from the the web sight listed above. However not all of the code is there (i.e. The UIM code is not there). If this does not work properly or is missing...
  2. dhauser

    IBM Director Agent 4.1.02 - twgmonit.exe memory usage

    !!!WARNING!!! IBM Director 4.12 has not shipped this is a test web sight for the team that is testing the IBM Director 4.12 code. DO NOT USE THIS the code may not be at gold code level and will not be supported by IBM. I will let everyone know when the code is ready and the web sight to go to...
  3. dhauser

    IBM NetFinity 5500, Can't load W2K Server !

    Not sure if you have access to this software, but if you have Ghost make an image of the good system then ghost it to the one that is not working and that should fix the problem. We do this all the time in my lab and it works great if the hardware is the same.
  4. dhauser

    IBM Director Agent 4.1.02 - twgmonit.exe memory usage

    Good news! IBM Director 4.12 should be released in the near future. Keep checking the IBM Director web sight for the release date.
  5. dhauser

    Getting alerts fromTivoli to Unicenter

    To my knowledge TME does not have any trap forwarding ability built into it. To get traps to go to both you will need to set up a server that is dedicated to trap forwarding and send all traps there. But much easer would be to reconfigure the SNMP on the agent systems to send their traps to...
  6. dhauser

    How to list the HDD part number installed on xSeries server?

    You will need to goto this address: http://www-1.ibm.com/support/us/search/index.html Enter the model-type for your system (i.e. 1111-11A). Look for the Hardware Maintenance Manual. Dan
  7. dhauser

    How to list the HDD part number installed on xSeries server?

    Are you looking for the FRU number?
  8. dhauser

    Netfinity 5000 Processor Upgrade

    Check out the post listed in IBM servers forum posted on 01/14/04 (posted 01/13/04). The thread is IBM Netfinity 5000. techieGeek has some good trouble shooting info that should help you. Dan
  9. dhauser

    IBM Director - minimum threshold values - can these be changed?

    From my understanding of Director this should disable all alerts related to disk space. I will look into this on our Director enviornment and see what it does. Dan
  10. dhauser

    IBM Netfinity 5500 SCSI Config Problems

    To answer your question about the video card. If you add a video card the BIOS should disable the onboard video for you and yes that should free up your RAM. Hope this helps. Dan
  11. dhauser

    4000R and Windows 2003 Video Issues

    To catorze Yes the 4000R can have PCI devices added. That is if you did not trash the PCL "L" adapter that came with it.
  12. dhauser

    Netfinity Management Adapter

    Later this year IBM is to release a Version of IBM Director that will give you the temp readings on a Linux OS as long as the hardware will support temp readings. You may want to check their websight for more info on when this realease will ship. (It is free software as long as you run it on a...
  13. dhauser

    4000R and Windows 2003 Video Issues

    You should know that if you add a PCI video card to this system you will need to "edit" your monitor adapter to fit into the small slot on the back. Just take a knife and shave off some of the top and bottom of your monitor plug and it should work fine. We had to do this to get this...
  14. dhauser

    Netfinity 5000 Processor Upgrade

    Check out this web address. It will link you to IBM's Netfinity 5000 Support sight. Should give you the info you are looking for...
  15. dhauser

    Newbie questions on EM

    I just took a look at my server and it looks like you can open the Event Browser, right click on the event, and select MIB Browser. This should bring up the MIB Browser and allow you to define messages for thoes traps. However I think it would be better if you could get the MIBs from the makers...

Part and Inventory Search

Back
Top