Recent content by DgtlLgk

my server has 2 physical eth.one belongs to 10.1.1.0(physically and virtually ,also mngment port belongs here) the other physical port is on another physical switch for 10.1.9.0(i created a new vswith with a vmkernel port that belongs to 10.1.9.0)

ok..........i think i've found my main mistakes 1.on the vswitch i already had a second vm from another network 2.it seems like i have routing problems lets say now that on my servers i have 2 physical nics.i configure one for the main network 10.1.1.0/24 vswitch and the other i assign it on...

We decide to implement some virtualization at the office We bought essential plus kit and 2 storage devices(IBM DS3512 and EMC clarion AX4) After we setup the VC server 5 and the rest of the 3 hosts , we configured the storages For the IBM we bought 2(one for each controller) extra iscsi...

ok guys.thanx a lot.i will give it a try with your suggestions tomorrow, and i 'll let you know.thanx again

i think ,what i need is how to end/close the session with the files i transfer from the pc to the remote location

Thanx guys for your response something i didnt make clear.as i log on to my nas machine, it automatically creates the folder as the user name is.i have already created the users on the nas, so each one will have access to his/her folder only. this as i said i found it online and i thought that...

not a vbscript guy:)....(wish i was) iam trying to make a backup script.ive managed with a lot of reading online to create this.my nas createw a folder of the user that is logging on ' ----------------------------------------------------------------------' Option Explicit Dim objNetwork...

VinceWhirlwind thanx for your reply 1)the asa is old.it was there before scenario 2. 2)we had a problem with dns an we recreated the zones,also we setup a second!!! dns(either this is my problem or routing) 3)will try that :)

iam not very familiar with cisco.....at first. we have 2 (HQ and location1) locations and they r connected with fiber.these 2 locations r very close to each other(about 200m).before they were connected lets say with 10.1.1.0/24 network.at HQ location we have everything there.at location1 there...

sorry for the late reply........well egodette all r the same on both srvrs.i've installed an XP pro also now to test.also with this iam facing the same.

......I have a strange problem with esx4....and iam not very familiar with it :) i have an HP proliant dl380G6, with 16gb ram,2 xeon 2.2ghz and 1.2tb HDD.It is setup with raid 10. i have installed on it 2 win2008srv 64 bits 250gb each,one solaris10 50gb,and one sco opensrv 5.7.only the...

ok iam not familiar with oracle :) what we want to do is : we have sun/Solaris10 machine with oracle on it.for backup we just export the data and we transfer the to bkp tape.now we just want to check that of what we r backing up is valid.we want to 'import' them to another x86 machine.can...

Mike042 what i did ......i reformat my HDD, and i created 'manually' one partition.Then i assign slice0 to my 50gb that i wanted the system to be installed.Then i assign slice1 to the rest 250gb as the folder that i want for my oracle.I dont know if that is what i should do from the beginning...

......Guys thanx for the replies..Thats why i post here :).All of my 8 slices(0-7)are for my first part. and mounted accordingly,indeed 2 is for my whole part..Mike042 i will try that.........still cant find the second partition.How am i gonna 'search' for it? cheers.

Mike042 thanx for your reply.......see that is my problem which device/slice i will do newfs???the 0-7 slices are for my 50 gb partition.how can i see which /dev/dsk/cxdxsx is my second 250gb partition?...if it "relies" in there :)!!! ...........cheers