Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by dgobe
-
ASA 5510 communication between inside interfaces(same security level)
The 192.168.222.0 subnet was just used in a "test lab" setup. The second configuration I posted is the one that is in use now. The IP configurations on the workstations are valid, I can ping the directly connected ASA interface as well as surf the 'net. There are no static routes installed on...- dgobe
- Post #9
- Forum: Security, hacker detection & forensics
-
ASA 5510 communication between inside interfaces(same security level)
Yep, in fact I had both subnets connected and all the computers could get on the net. I just reduced it to eliminate any routing issues. I've disabled the Windows firewall on both computers(it's the only one installed). When I try a TFTP get between the subnets(in either direction) the TFTPD...- dgobe
- Post #7
- Forum: Security, hacker detection & forensics
-
ASA 5510 communication between inside interfaces(same security level)
Aw snap! I changed one of the subnets and the ISP config on the above scenario and now it doesn't work. I reduced the setup to just two computers with one connected to student and the other connected to student2. Both had a static IP and their gateways were pointed at the respective ASA...- dgobe
- Post #5
- Forum: Security, hacker detection & forensics
-
ASA 5510 communication between inside interfaces(same security level)
Thanks unclerico! I had messed around with identity NAT before but I don't think I hit the right incantation. Both of your suggestions work and I'm using option 1 currently. You had the IP's in option 2 transposed, which is understandable. It should be: static (student1,student2)...- dgobe
- Post #3
- Forum: Security, hacker detection & forensics
-
ASA 5510 communication between inside interfaces(same security level)
I'm new to the ASA and can't figure out how to communicate between two inside interfaces with the same security level. I have two subnets directly connected to the ASA along with a connection to an ISP. So far I have been able to get both subnets connected to the Internet(with PAT) but I can't...- dgobe
- Thread
- Replies: 8
- Forum: Security, hacker detection & forensics
