Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by dfletch
-
User permission setup
Thank you me2you, I could not find this info anywhere on the MS site!!! big help thx- dfletch
- Post #3
- Forum: Microsoft: Access Other topics
-
Trouble shooting site to site VPN issue
Hi Eddie, I didn't copy and paste the config to the firewalls. I'm running debugs and the only output I see is the the client connection from remote users. No these two boxes have never connected to each other or anything else they are brand new. Does anyone know if this means "ISADB...- dfletch
- Post #8
- Forum: Security, hacker detection & forensics
-
Trouble shooting site to site VPN issue
No I didn't change splittunnel line yet. So what you are saying is that I should add access-list vpn3000_splitTunnelAcl permit ip 172.16.1.0 255.255.255.0 192.168.100.0 255.255.255.0 which is the VPN remote pool? or just to 172.16.1.0 255.255.255.0? and the show crypto isakmp sa output is...- dfletch
- Post #5
- Forum: Security, hacker detection & forensics
-
Trouble shooting site to site VPN issue
themut, Thank you for replying and pointing out the typo. I fixed the crypto configuration and ran clear cry sa, and I still don't see any change in the negations counters. interface: outside Crypto map tag: vpnmap, local addr. (CENSORED) local ident (addr/mask/prot/port)...- dfletch
- Post #3
- Forum: Security, hacker detection & forensics
-
Trouble shooting site to site VPN issue
Hello board, I have been fighting like heck to get this things working and I have hit the wall! I’m not seeing any traffic negations on either end. I have tried to clear Crypto sa and several other things to get the 2 boxes to try and connect. Could you folks please have a look at my VPN...- dfletch
- Thread
- Replies: 8
- Forum: Security, hacker detection & forensics
-
-
PIX 515 for Remote Access
Hello board, I'm trying to setup my PIX 515-R for remote access and I have hit the wall. I'm able to receive dhcp from my configured address pool and DNS, but I'm still unable to ping anything on the inside. What am I missing in this config listed below and why am I not receiving a default...- dfletch
- Thread
- Replies: 1
- Forum: Security, hacker detection & forensics
-
shutting down Telnet for otside
Here's an example.... Create access-list 1 permit 10.1.1.0 (your inside subnet) access-list 1 deny any log Then do a line vty 0 4 from privileged mode and apply the access-list with access-class 1 in- dfletch
- Post #2
- Forum: Security, hacker detection & forensics
-
Mail is coming in, but not going out..
Hello all, as you can tell I’m not an Exchange guru my Exchange 5.5 server can receive external mail, but mail leaving the site gets lost any clue’s why? I have an MX record setup with my ISP but I’m not sure if I’m missing a step… Thanks in advance- dfletch
- Thread
- Replies: 1
- Forum: Microsoft: Exchange
-
Open Veiw on Unix and Cisco Works on WIN 2K
Has anyone been able to get these two working together on different platforms?- dfletch
- Thread
- Replies: 1
- Forum: HP: OpenView Ops and NNM
