Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by defrag4
-
Port forward not working on PIX 501
I am attempting to forward port 13000 to 192.168.1.11 I have setup 2 rules, an access-list and a static rule, i cleared the xlate however I still cannot get to the port from the outside. I checked internally and confirmed the port is open and available. Can anyone see why this is not working...- defrag4
- Thread
- Replies: 2
- Forum: Security, hacker detection & forensics
-
Port forward on a PIX 501
Let me know if you need any more info on my config -
Port forward on a PIX 501
I am attempting to forward port 13000 to 192.168.1.11 I have setup 2 rules, an access-list and a static rule, i cleared the xlate however I still cannot get to the port from the outside. I checked internally and confirmed the port is open and available. Can anyone see why this is not... -
Dual WAN w failover on Cisco 1811 Router
fellow on another forum gave me this advice Since you didnt terminate any of the WAN interfaces directly into the router, there is no easy way to notify the router that there has been an upstream failure. Give this a whirl (im guessing at the IP of your cable next hop): no ip route 0.0.0.0... -
Dual WAN w failover on Cisco 1811 Router
Howdy, I have a Cisco 1811 router, I also have 2 internet connections. A T1 and a Cable modem. I have them both configured on the router and they seem to be working OK. However failover is not working, What I would like is for one internet connection to take over if the other one drops out. How...
