Recent content by ddersch

No, not with the regular Cisco VPN client that is used with the Cisco routers. We ended up having both the Linksys and the Cisco drivers loaded simultaneously on the same client. This works without conflict as long as one or the other connection is active, but one can not be connected to two...

I bought an RV042 after talking to two separate people in Linksys sales who say that I can use a CISCO VPN Client with the RV042 to establish a software to hardware VPN connection... Has anyone been able to do this? I am stuck trying to determine what settings to use on the RV042. I had a...

THe CISCO VPN client has a box on the Transport Tab that says "Allow Local LAN Access". Put a check mark in this box and then save it. Exit out and come back in and establish a new connection. Hope this helps!

We have a return rate of 33% for SOHO6 boxes, but the FB700's and the FB1000's have been solid, and have worked without flaw. Our biggest issue is that we have MUVPN clients that need to get into both CISCO sites and the Watchguard sites, and the two can not happen at the same time (as far as I...

I've used both WINs and DNS, and you just need to make sure that you have an entry on the WINS/DNS server for itself. After that all seems to work well. I do have a site in which the workstation does not log into a Domain. That site only works so well. I would recommend using a domain based network.