Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by Davembg
-
Cisco 800 series load-sharing????
We have (2) ISP's, looking to load-share between them. YES - outgoing only. DNS round-robin is good enough for us.... Here's some starting links - NAT on a stick - http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094430.shtml Unequal links load sharing -... -
Cisco 831 Ethernet2
So, I'm starting a new thread where maybe we can get some insight into using the 800 series routers as dual-wan (possible load-sharing) routers. -dave -
Cisco 831 Ethernet2
Right on with the tip about port 4.... http://www.cisco.com/en/US/products/ps5853/prod_bulletin0900aecd801ec63f.html Not so sure on the idea of using it for whatever you want...... I can't seem to load share, even using simple CEF with the port(?) It would be GREAT if I could. It seems to... -
Cisco load sharing with EIGRP or IGRP(?)
Not with the 831's, they don't support VLANS. I've got the traffic in (2) subnets, one for voice, one for data. They are also unique Vlans. Not sure what you're getting at.....but, thanks for comment. -
Cisco 831 Ethernet2
The Ethernet2 is a layer 3 capable "virtual" interface. From my experience, it's for use as a DMZ function of the router. I've tried to configure it for load sharing between 2 ISPs without success. Here's a snip of my failed config. Bacially, the router get's REALLY doggy and staic NAT doesn't... -
Cisco load sharing with EIGRP or IGRP(?)
Any thoughts on this subject are greatly appreciated: Currently have Cisco switches and routers listed below - 1-3550 Poe switch 1-3524 Poe switch 1-2811 router (with 4x4 FXO ports) - voice router 1-CCM 1-Unity 3-831's All ios images support eigrp and/or igrp. Basically, I'd like to...
