Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by dasan64

  1. dasan64

    German Trunk

    Sorry. I trie it again.http://files.engineering.com/getfile.aspx?folder=1dc1f7d7-7216-4367-b183-0ba7c253f68f&file=BRI_AMT_an_CM_anschalten__aar_ars_vertauscht.pdf
  2. dasan64

    German Trunk

    Hi. here is a description for German Trunk.
  3. dasan64

    CS1K

    Hi, we have one CS1000 Release 7.6. Does anybody knows how to change the content-type in the SIP Invite. BR
  4. dasan64

    Avaya SM and CS1K SIP trunk

    We have the same combination and it works. Please give a screenshot from the trunk and the signalling group.
  5. dasan64

    DCH captures

    LD 96 stat mon there you see what dch is enable dis msgi XXX (dch number) dis msgo XXX (dch number)
  6. dasan64

    GROUP_SETTINGS parameter in 46xxsettings file

    You must reboot the Phone.
  7. dasan64

    GROUP_SETTINGS parameter in 46xxsettings file

    yes
  8. dasan64

    GROUP_SETTINGS parameter in 46xxsettings file

    --> Create a Group in the settings file --> change station XXXX --> page 3 Parameter "IP Phone Group ID" enter the group number that you create in the settings file
  9. dasan64

    Avaya CM

    The One X use also the call park feature from the cm. You must configure Extensions for the Attendant. --> Log in to the One X Attendant as Prinzipal --> edit --> work profile --> edit --> choose profiles and press select --> activate Hotkeys --> edit --> key assignment --> functions scroll...
  10. dasan64

    Avaya CM

    1. You must Updtae at first the One X Server, then the Clients. Please save the config on the Server before you update!!!!!!! Read the release notes!!!!!! 2. Yes you can park more then one call. - change console Parameters, page 2, COMMON SHARED EXTENSION you need so many free Numbers as you...
  11. dasan64

    Issue with Cisco Catalyst 3550 Switch and G700

    please connect the g700 to port 11 and give a sh int statu
  12. dasan64

    Issue with Cisco Catalyst 3550 Switch and G700

    What for a Software Version has the Switch? sh ver Please connect the Gateway on Port 1 an make sho int statu Post the results
  13. dasan64

    Issue with Cisco Catalyst 3550 Switch and G700

    Try this on the switch. conf t interface range fastethernet 0/1 - 24 no switchport mode dynamic desirable switchport mode access exit wr
  14. dasan64

    Email notifications

    Site Admin --> Tools --> Options --> SMTP Then --> Fault Performance --> Advanced Polling Schedule and Schedule Monitor Alarms But think, when you closed the Site Admin no Messages will be send.
  15. dasan64

    CS1000 7.5 Enable/Disable TN in UCM

    Go to Element Manager --> System --> Maintenance --> LD32 --> Unit Commands --> select disu or enlu and enter the TN in the command parameters field
See more

Part and Inventory Search

Back
Top