Recent content by darrellx

Thanks Merlinman> Will give that a try when I get back to the office. darrellx

I am trying to dial in to my Merlin Magix system through Winspm with no success. Here is what I am doing. I have a dedicated fax line in my office that is not hooked into the Merlin. I have my modem plugged into this line. I have winspm site set up with connection type external. enabled is...

I have a Merlin Magix system with 5 4424d+ phones. How do I set up my extensions for these. Thanks Darrellx

Thank you for the posts. I am out of town, but will try these when I get back to the office Tuesday. Thanks again. darrellx

I recently purchased a used Merlin Magix for my office. I have no phone experience and am lost as to how to connect to the system with winSPM. Does anyone know of a step by step guide of how to connect to the system by modem for programing? Purchased a 355 adapter and tried a direct connect...

Thanks Merlinman. Fax is on dedicated line so we just bypassed the system for simplicity. Thanks for your reply.

I have Merlin Magix system with 3 lines coming in from the phone company. I am trying to hook up a fax machine to one of the lines but can't seem to figure out how it works. Any help would be really appreciated. Thanks in advance Darrellx

I have purchased a used Merlin Magix phone system with a 412 TDL LS-1D board and a w/CKE5 processor board installed. I am having dsl hooked up to this location Monday, but I noticed when I plug the dsl filters into the phone line, I lose my dial tone and the message light flashes on the phone...

I have purchased a used Merlin Magix phone system with a 412 TDL LS-1D board and a w/CKE5 processor board installed. I would like to program with the winSPM via my laptops modem but I can not find out which port to plug my cable from the modem to the Merlin system in to. I have no experience...

Thanks for your response blueboyz. I did figure out the info that I needed for my report. However I am looking for someone who is familiar with pawcom or tool kit add ons for Peachtree. Thanks Again Darrell Ross

I am using 2009 Quantum

I am trying to build a Crystal Report that shows how many of a particular item I sell to a specific customer based on a specified date range. I want to include what the unit sell price and extended sell price for that invoice number is. What database do I find this info in for pulling it off...

Thanks for your reply. Yes, restore and maximize appear but when I click it nothing really happens. It looks like the window opens but immediately moves it to the background. Happens so fast that you can barely see it. Darrell

I am trying to open Microsoft Word and I will not load. It looks like it might be loading in the background but if I click on the menu bar at the bottom, it will not bring it to the foreground. I have tried uninstalling and reinstalling it but the same thing happens. It opens in the menu bar...

I tried to change the control source but it doesn't show the table that this field is in. How can I open this table while in properties of that field in the form? Thanks