Recent content by dannyyo

I'm somewhat new to setting up an iSCSI SAN box. So currently I've setup 2 new VLANS to enable MPIO on the 10GB NICS as shown in the picture (colored blue). My question is if I added another SAN box to the network (yellow) with MPIO again, do I need 2 additional separate VLANs or can I just...

I configured my windows 2003 Storage Server with NIC teaming at the device level and configured the cisco 3750 switch for LACP. It's set up identicl to this (http://ramazancan.wordpress.com/2011/08/06/how-to-configure-nic-teaming-with-hp-proliant-and-cisco-or-procurve-switch-infrastructure/)...

First of all thank you for the quick response. I have read a about the option 1 and 2 that you speak of, however no one mentioned anything about any related issue this may cause in the long run? I don't work in accounting, and I only work with GP only when I have issues to deal with. Are...

Our company is planning on changing from Fiscal year to Calendar year. How do I plan this out. I read a lot of docs on how to do it, but when is the best time to do this? Here's the current fiscal periods 2014 => 4/1/2013 to 3/31/2014 (open) 2013 => 4/1/2012 to 3/31/2013 (closed) 2012 =>...

Is there a way to modify the PO report in Greatplains 2010 to print a "legal statement" on the backside of every PO page being printd? We already have a duplex printer, so we are half way there. But I'm not sure how to go about adding a text box in which section of the PO report to have the...

klewis10367, did you install sql 2005 and gp 9 onto a 64bit windows server? If so which version of windows?

Do I install GP 2010 after the SQL has been upgraded the way you suggested klewis10367?

Does anyone have an easy guide or steps to upgrade to GP2010 from GP 9.00.0281? On a test server, I installed windows 2008 r2 standard, sql 2008 r2 standard ed., then I imported the databases from our production gp which has the sql 2005 std on windows 2003 std. After that I installed GP 10...

We currently have exchange 2007 std running in our environment. We've been researching High Availability and we are leaning toward the CA's HA software solution. The other option would be to migrate to Exchange 2010 std and implement DAG. But this would require more time to implement. Has...

from the client machine are you able to ping autodiscover.reipf.com? and what does nslookup autodiscover.reipf.com tell you?

Thanks for your confirmation. I am going to have to look at the exchange 2010 upgrage path along with DAG. If I stayed with Exchange 2007, is there a third party software that you can recommend, that'll provice HA. I've looked at WanSync from XOsoft and Double Take about 2 years ago, but it...

We currently have Exchange 2007 SP2 Standard edition runnin on Windows 2008 Enterprise server. We currently have LCR, but we don't think it's a sufficient DR. So we looked at SCR and tested it, but have not implemented it. Now we are looking into implementing CCR, so that it'll truly be DR...

we have Cicso Catalyst 3750G. There's 2 locations connected via T3 lines going into a Adtran's Netvanta 5305 routers. Behind the routers are the 3750G switches adjacent to the Netvanta router and further out connected via fiber are more 3750g switches. I just need to add one device to the far...

yes but in order to let vlan 2 to talk to vlan 1, wouldn't I need to enable routing on the switch?

We currently have a flat LAN. I do not want to convert the whole network to VLAN. We have all cisco switches all throughout the company. If I need to plug in one device to one of the ports to control access via access list, do I need to convert the whole netowrk to VLAN? I just want to make...