Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Daniel2040

  1. Daniel2040

    internal access to DMZ outside IP's

    Thanks, When i use the packet tracer it all comes back ok. Daniel.
  2. Daniel2040

    internal access to DMZ outside IP's

    Once again thank you for all your help on this. The config now reads as follows but still no access: : Saved : PIX Version 8.0(3) ! interface Ethernet0 nameif outside security-level 0 ip address xxx.xxx.xxx.25 255.255.255.248 ospf cost 10 ! interface Ethernet1 nameif inside...
  3. Daniel2040

    internal access to DMZ outside IP's

    Result of the command: "route dmz 30.30.30.0 255.255.255.0 30.30.30.100" ERROR: Cannot add route, connected route exists When i was editing config for here i cut that line out i think.
  4. Daniel2040

    internal access to DMZ outside IP's

    Still no joy, config reads as follows: : PIX Version 8.0(3) ! interface Ethernet0 nameif outside security-level 0 ip address xxx.xxx.xxx.25 255.255.255.248 ospf cost 10 ! interface Ethernet1 nameif inside security-level 100 ip address 192.168.0.200 255.255.255.0 ospf cost 10 ...
  5. Daniel2040

    internal access to DMZ outside IP's

    no it is still in the running config
  6. Daniel2040

    internal access to DMZ outside IP's

    sorry to be a pain. I have tried both of the above and still nothing :(
  7. Daniel2040

    internal access to DMZ outside IP's

    yes they are the VPN clients.
  8. Daniel2040

    internal access to DMZ outside IP's

    i only need the 'inside' interface to access www on the 2 web servers on the 'DMZ' interface. Would the no-nat be more secure for the inside interface?
  9. Daniel2040

    internal access to DMZ outside IP's

    thank you for all your help. It has accepted all the commands but from a LAN client on the network 'Inside' i still cannot see the DMZ :( Kind regards, Daniel.
  10. Daniel2040

    internal access to DMZ outside IP's

    Thanks, it works fine up until: Result of the command: "object-group service www tcp" The command has been sent to the device Result of the command: "service-object eq www" service-object eq www ^ ERROR: % Invalid input detected at '^' marker.
  11. Daniel2040

    internal access to DMZ outside IP's

    yes it does
  12. Daniel2040

    internal access to DMZ outside IP's

    thanks for your help when i use the command network-object i get : Result of the command: "network-object 0.0.0.0 0.0.0.0" network-object 0.0.0.0 0.0.0.0 ^ ERROR: % Invalid input detected at '^' marker.
  13. Daniel2040

    internal access to DMZ outside IP's

    PIX Version 8.0(3) ! interface Ethernet0 nameif outside security-level 0 ip address 213.xxx.xxx.25 255.255.255.248 ospf cost 10 ! interface Ethernet1 nameif inside security-level 100 ip address 192.168.0.200 255.255.255.0 ospf cost 10 ! interface Ethernet2 nameif DMZ security-level 50...
  14. Daniel2040

    What ip address to use on DMZ interface to disable nat

    PIX Version 8.0(3) ! interface Ethernet0 nameif outside security-level 0 ip address 213.xxx.xxx.25 255.255.255.248 ospf cost 10 ! interface Ethernet1 nameif inside security-level 100 ip address 192.168.0.200 255.255.255.0 ospf cost 10 ! interface Ethernet2 nameif DMZ security-level...
  15. Daniel2040

    internal access to DMZ outside IP's

    Hi, I have a 515e and 2x web servers on DMZ on 30.30.30.1 & .2 I have a LAN with NAT on 192.168.0.xxx I have mapped 2x external WAN address's 213.xxx.xxx.35 & 36 to the 2x Web servers. When i go to 213.xxx.xxx.35 or 36 from the LAN i cannot see the web servers. Can anyone advise. Kind...
See more

Part and Inventory Search

Back
Top