Recent content by cztech

Most excellent! Your description rings a bell from many years ago. Thank you! cztech / www.cztechnologies.net

Thanks Telecomboy, but they are going to be using 18D's off ETR6 boards. Any options there? cztech / www.cztechnologies.net

Hello - Trying to setup Remote Call Forwarding for users via Manager - Basic programming mode for a Partner IPO version. I see the area to tick on RCF for each user. But how do I specify where the extension will forward to? Another thread mentions forwarding the extension to a personal speed...

The site is back up, but please files and links are still updating. Please let me know if you find anything broken. c*a*l*e@cz*technologies.net (remove stars). cztech / www.cztechnologies.net

Hey gang, terrible hacking, yes. Besides getting out and earning money (e.g., 'phone system technician') I'm trying to get ipofficeinfo.com back online. As many know there are a ton of links and docs on the site, I tried uploading them last evening and it crashed my office internet. So not going...

Thanks! That does it - Phone Status EOS as of 9 DEC 2013. Replaced by One-X Call Assistant (configured for 'Accessibility'): one-X Call Assistant Accessibility one-X Call Assistant Accessibility feature provides information about the system status, phone status, call events, and screen...

Has anyone ever rolled this out? I'm trying to find if it's still available. The part number still shows up w/ my distributor. This is a software install that interfaces w/ TAPI on the end-user workstation to give audio-prompts for call status, incoming number, etc. It's not cheap, but may be...

Want to add Option 242 to DHCP scope Windows Server 2012. Documentation says we should 'right-click' on the server and select pre-defined options.' Unfortunately this is not showing up w/ 2012. cztech / www.cztechnologies.net

Sorry I didn't update this with the final solution. The problem was that there were about 30 "virtual" users on the Primary system (auto attendant forwards, user forwarding, mailbox only users) that were tying up IP Endpoints because 'auto-create extn' was left on by the original installation...

The SE licenses all go in the License area of the Primary server. In this case (unlike the endpoint licenses and the VCMv1, as is now clear), it is true centralized licensing. In this pic: http://t.co/2YpnlXf4No you will see the licenses on the Primary SE. There are 4 "Server Edition" licenses...

So we think this is a VCMv1 vs. VCMv2 issue! The VCMv1 (which we have here) has the 12 virtual endpoints, and precludes you from using 'centralized' endpoint licensing! With the VCMv2 (which as stated above does not have the 12 virtual endpoint licenses), you will be able to use centralized...

We are having also having IPOSS registration delays, so it hasn't gone to Avaya, yet. My support channel went through all configs and the .cfi files, and have verified proper programming is in place. They are speculating that we have a bug. In the meantime, 5 IP endpoint licenses have been...

Downgraded the new IP500v2 node to 8.1.65, to match the release of the Primary SE. This did not fix the issue, unfortunately. Local IP phones are maxing out at 12 up at a time. Plenty of endpoint licenses available on the Primary SE, but they are not usable - at this time - by this new remote...

I am hesitant to delete the virtual licenses, as I suspect they are currently providing 100-percent of my current working phone functionality! I guess my only plan now is to downgrade this new site to 8.1.65 to match it w/ the Primary server. cztech / www.cztechnologies.net

As an aside, and very strange, my 2 analog station ports on the combo card would NOT work until I got the server edition license for this expansion system on the primary. It was weird not having dial tone on the station ports - usually you can always count on some POTS dial-tone even when all...