Recent content by czins

Hello, try: set -o emacs in your .profile file regards Stefan

Hello Khalid, you were right we had to use a category 6 cable instead of the category 5 we initally used. Thanks for your answer. Regards Stefan

Hello, I have a 520 Server connected with the on board adapter to a CATALYST 6500 switch. The only combination which works is auto sensing on both sides, but then the entstst -d ent0 and some mesuring gives a network speed of 100Mbit full duplex instead of the max. possible 1Gbit. When we tried...

Hello Ken and aau, thanks a lot for your help, it worked perfectly. Regards Stefan

Hello, I produced accidentally a file named: /tmp/-c I tried following commands to remove it: rm * rm "-c" rm "\-c" rm '-c' but I was not successfull. Does somebody have an idea ? Regards Stefan

Hello mrn, many thanks for your answer. We are running a little oracle database on the server and we use it as the fileserver in parallel. Performance is not the problem (even with the H80)but we should not have service interuptions longer then 1 to 2 hours. Regards Stefan

Hello, we are thinking about replacing our old H80 server. We had the idea to take two small p5servers and a san disk system with HACMP. Do we need a HMC for this configuration or is there a low end mode for HACMP which does not need a HMC ?

Hello Bong, yes you are right, this list is created in a proc. Does this have an effect displaying the list with a listbox ? Regards Stefan

Hello Bong, thanks for your replay. I tried it many times with the options you described because it seemed so logically to me. But I never got the list in the window. Is there another thing I could miss in this area ?

Hello, I just got it: foreach i $cliste { .m.outp.lb insert end $i } Thanks for reading anyway Stefan

Hello, I need to display a listbox of a list variable crated with with lappend (cliste). The command "puts" shows the rows enclosed in brackets {} but I cant get the list displayed in the listbox. Please check the command: .m_outp.lb $cliste in my code. Can I have some advise please ...

Hello everybody, I just installed, the C++ compiler v6 and added the line in the nodelock file as described. My c programs are compiling without any troubles but my .cpp programs return a signal 11. Does anybody have an idea whats wrong ? Regards Stefan

Hello, I had some similar effects with another application running under AIX5.1-ML04. After migrating to AIX5.1-ML05 the I/O wait has disappeared. Regards Stefan

Hello Levw, this was the first batch of IBM computers where no machine had a new defect part. They are much quieter and lighter then the p630 and my user are telling me they are fast like hell. For good performance you have to install at least AIX5.1-ML05. Best regards Stefan

Hello blasvinas, thanks for your reply. The problem was that we had #6204 SCSI Diff(erential). Adapter and this is not compatible with the single ended scsi. When you want to connect your old tapes to this machine you need the: #6203 Ultra3 SCSI Adapter There are no more scsi adapters on...