Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by crutchie

  1. crutchie

    Err 404

    Hello again and thanks for the previous help. Currently I am trying to connect a Cisco 2811 router with Call Manager express through a t1 wic card into an Opt 11 TMDI card. The problem I have now is when trying to make a phone call through the PBX. I get an error code err404 (no default tree...
  2. crutchie

    ESN Dialing and broken dialtone

    Hello all. I'm connecting an opt 11c to a cisco 2811 router with call manager express. I'm using a TMDI card to a T1 wic card off the router. The connecting is being made using q-sig. The dchannel goes up and all the tie's are reading idle and I can make a phone call using the access codes...
  3. crutchie

    Builiding a t1 Trunk to a cisco Router

    Currently I'm tasked to build a trunk From a Opt11C to a Cisco 2811 Router. The IFC that seems to work with Both is NI2. the D-Channel Comes up nicely, but when I go to program them, I Start to Get Error messages. The white paper I found on this must be prior 2 some patches, cause I've never...
  4. crutchie

    Calls getting barred

    yes what I printed out was what gets spit out when my msgi and msgo was enabled on the dch. BUG083 BUG083 : 00000016 00000221 BUG083 + 1067FA70 109E2DC0 109E2D1C 109C7702 109C5B0A BUG83 + 109C3402 109C1E54 109C1890 104B3036 104BB23E BUG083 + 104BAF64 104B931E 104B1CE0 10888D98 10885BE8 BUG83...
  5. crutchie

    Calls getting barred

    First I'd like to thank all the people that have helped me with programming before. John Poole you've helped a lot. Right now I'm trying to build a T1 trunk of between my main switch (opt 11) and a US Redcom switch so that our 2 bases can talk to each other. I've sorted out the majority of...
  6. crutchie

    linking opt 11 to opt 11 thru tmdi card (t1 Trunk

    okay eventually I'll link my option 11 to a Redcom System, before I did that, I was trying to attach it to a spare switch I had here to make sure I had the programmmin correct. Sure enough I've been at it for 2 days and most I learned is that I didn't know too much about making these trunks...
  7. crutchie

    Changing ncos levels by time of day

    Hello all I'm brand new to the forums, just found the site while trying to figure this out. I have one option 11 I'm in charge of, and the calls get sent out thru a satellite system back to our home base. this gives us only 14 trunks to call out. Now because of this I have to program in an...
See more

Part and Inventory Search

Back
Top