Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by CrossTalkTek

  1. CrossTalkTek

    Consensus Please

    Thanks for the reply's. And, Yes to mentallimit, A reboot is needed afterall. This is a linux patch, not a CM patch. Thanks again, just wondering who all knew this.
  2. CrossTalkTek

    Consensus Please

    Avaya recommends rebooting after the DST patches. PLEASE tell me you experiences.
  3. CrossTalkTek

    translation corrupt after upgrade from 2.2 to 3.1

    You needed to load the Pre-installation patch 1204 "Before" performing the upgrade. This patch MUST be installed prior to upgrading from 2.2 to 3.1. The patch, as well as information related to it, is located at the following shortened link: http://snipurl.com/1amy9 As far as what you can do...
  4. CrossTalkTek

    Lesson learned from DST patch

    Yes, MSIE always does that to gzipped linux files. I really don't know why, though. I use the browser, Firefox, and don't have that problem. Firefox is just so much more stable, and imo more user friendly. Your post might help others, thanks.
  5. CrossTalkTek

    2007 Daylight Savings Time Patch

    Thanks ALL. I just upgrade my first of man, and applied the DST patch easily. Thanks again! Crosstalktek
  6. CrossTalkTek

    2007 Daylight Savings Time Patch

    Has anyone applied the new CM Daylight Savings Time Patch? If so, any problems? Can we just load it like any other hot-patch? (upload, then go to linux, and update_unpack then update_activate)? Does it load over current patches smoothly?
  7. CrossTalkTek

    4600 set at home

    I'm running a 4621SW IP phone (FW 2_6)-CLAN in our G3SI. I've had it working since July 2006. System: G3siV12 Software Version: R012i.02.1.118.1 I know you asked about an S8700, but wanted to input my setup to see if that helps. I read the "vpnphone_readme.htm" and Section II...
  8. CrossTalkTek

    Changing settings on IPSI

    to letman, I have been following this thread as well, Please respond to phonegoober's question, as I am interested in telneting as well. what is that command, if you could reply, I would also be gratefull! Thanks,
  9. CrossTalkTek

    Firmware: VAL Board Upgrade Failing

    Tolson is right, It has to be in the root directory, that's why he needs to cd / that's cd "with a space" / I've done lots of them over the years.
  10. CrossTalkTek

    Avaya Surplus .mp3

    Can anyone tell me what song this is a takeoff of? It's really well done, check it out. Here is the URL http://s88531596.onlinehome.us/Surplus.mp3
  11. CrossTalkTek

    Avaya Surplus .mp3

    I don't know if this is appropriate, at this time of year, or in this forum, so I apologize to anyone that might be offended. I recently found this forum,(a few months ago), and check it many times a day. It sounds like there might be lots of x-Avaya employees here. Am I right? Anyway, here's...
  12. CrossTalkTek

    Firmware: VAL Board Upgrade Failing

    I don't know, if you are ftp'ing it directly the the VAL, and you type cd / put tn2501ap_fX.bin ls you should see the file there. You can also go to your SAT and type: list directory board (enter VAL slot #) ------ From YOUR example, it looks like it did indeed transfer, you can see the put...
  13. CrossTalkTek

    Firmware: VAL Board Upgrade Failing

    When you ftp, do a "cd /" without the appostraphes, this will get you to the root directory, upload firmware there. I think that is your problem. The firmware needs to be in the root directory on the VAL board.
  14. CrossTalkTek

    Site Documentation

    However, I cannot find that document that Mike was refering to.. If anyone can point us to that document, I'd appreciate it.
  15. CrossTalkTek

    Site Documentation

    I was just following this thread. All great info! There might have been a typo with that suggested link, here is the link that I believe "mikeydidit" meant to type: http://www.utilcall.com/
See more

Part and Inventory Search

Back
Top