Recent content by cpb72

DO YOU KNOW WHICH FOLDERS CONTAIN THE TWO INSTALLATIONS.IF YOU KNOW FOR SURE YOU MAY DELETE ONE OF THE INSTALLATION FOLDER.BUT MAKE SURE YOU ARE 100%.IF YOU DON'T THEN DON'T DELETE ANY FOLDER.TO BY PASS ONE INSTALLATION YOU HAVE TO EDIT YOUR BOOT.INI FILE.FIRST YOU MAKE A BACK UP COPY OF THE...

RIGHT CLICK ON MY NETWORK PLACE>PROPERTIES>CONNECTIONTAB>RT CLICK>TCP/IP>PROPERTIES.AND ON THAT TAB YOU WILL ENTER YOUR MACHINE IPCONFIGUTRATION.ENTER YOUR DNS SERVER ADDRESS CORRECTLY.SAVE(OK).REBOOT.AND TRY TO PING YOUR SERVER FROM THE XP MACHINE AND FORM THE SERVER DO A PING TO XP.IF THE PING...

GO TO BIOS MENU.SELECT FIRST BOOT DEVICE AS CD ROM.SAVE& EXIT.I WILL ASSUME YOU HAVE THE SERVER CD ROM IN THE TRAY AND MAKE SURE THE CD IS BOOTABLE.WHEN THE MACHINE BOOT IT WILL ASK YOU TO PRESS ANY KEY TO BOOT FROM CD.FOLLOW THE INSTRUCTION FROM THERE.HOPE THE BEST.AFTER THE SET UP COMPLETE YOU...

I DON'T KNOW IF YOU WILL USE A THIRD PARTY SOFTWARE TO DO THIS.IF YOU DO THEN GO TO WWW.SNAFFILES.COM AND DOWN LOAD A UTILITY CALLED TIMED SHUT DOWN. I THINK IT IS UNDER THE MISC.CATAGORY.YOU CAN DO REBOOT,SHUT DOWN HEBERNATE ETC.AT YOUR CHOOSEN TIME.

Few things bothering me.you did not mention wheather you have checked how much resource the system already taken.You also could increase the size on page file.I had almost similar problem with goback.I don't see any reason that you have to run goback since xp itself has system restore.You should...

you can check at www.snapfiles.com.Under tcp/ip networking there are some network monitoring tools which are freeware.

just an advise.Atleast make 2 partition.Install the o/s on one partition.And install the application and the downloaded application on to second partition.In the case of a system crash you have the data and application intact.

check the logs file (system and application).If everything normal then you have to repair the installation.The repair will keep your current settings.Insert the cd and follow the instruction.Setup will find out the currently installed o/s and give you the option of new installation or repair...

To begin with microsoft does not encourage to install a second o/s in the same partition.However as the other respondent suggest to use a third party program,you can also use the 2000 server cd to create a new partition during the installation process.During the installation process the setup...

To join a domain you need to specify the work station's ip address,and the dns server(s)ip address.gateway address may not needed.You also have to have connectivity between your workstation and dns server,meaning your ping command to the dns server have to be successful.If the ping to dns server...

Have you checked if the particular user was added in any group.What permission he has (in any other group, if he is a member of any group at all).Rember permissions are cumulative ia win2k ad.

I assume that the system fail to boot.If this is the case then the following answer can help you.Otherwise ignore this suggestion. 1. The boot.ini file has wrong entry 2. The ntoskrnl.exe file is corrupted. In the first case you have to correct the entry in boot.ini file.Any win2k server book...

When you create a folder and you share the new created folder(the folder is not automatically shared),whatever the object below it would be shared automatically.If you want to restrict sharing the subfolders you click security tab of the folder and uncheck "allow inhertable permission from...

if you have a copy of 2000 cd yoy can make bootable disk by running the following command #makebt32 a:. where "a" means the floopy. you must browse to \bootdisk directory of the cd. Thanx.

There are a lot of question unanswered. Who will use the machine? Is it a part of network? Are you denying access to some specific users? Is the local machine has no dns server entry for the network the machine can not find the server. You can also block the machine to access the server from the...