Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by cpace
-
Cisco Metro ethernet config
That would be great.. But I am using a router. Shouldn't I be able to use the 2 eth interfaces of the router ? -
Cisco Metro ethernet config
How would I set up 2 metro ethernet lines on a cisco 1841 router ? -
Frame relay to MPLS or PTP to MPLS ?
I will be using VOIP and MPLS. What is the best access method to the MPLS Network ? Frame-relay or Point-to-pont T1 ? Thanks, Chris- cpace
- Thread
- Replies: 1
- Forum: Data Transmission general discussion
-
PIX or Watchguard
Watchguard. If you want to spend hours troubleshooting use a pix.- cpace
- Post #6
- Forum: Security, hacker detection & forensics
-
PIX 506 NAT getting out everyting else is not
I know... I have tried everything. I changed the ip of my router to 186. here is my updated conf. Thanks for your help. ip address outside 66.0.225.185 255.0.0.0 ip address inside 10.20.0.1 255.0.0.0 ip audit info action alarm ip audit attack action alarm pdm history enable arp timeout 14400...- cpace
- Post #6
- Forum: Security, hacker detection & forensics
-
PIX 506 NAT getting out everyting else is not
I changed the global to 186 and the outside ip address to 185. Still nothing. The NAT is working great though.- cpace
- Post #4
- Forum: Security, hacker detection & forensics
-
PIX 506 NAT getting out everyting else is not
I corrected my global I misstyper 65 nstead of 66. Still nothing.- cpace
- Post #2
- Forum: Security, hacker detection & forensics
-
PIX 506 NAT getting out everyting else is not
PIX 506 servers NATTING getting out everyting else is not. Please help ! The PDM will not work either. PIX Version 6.2(2) nameif ethernet0 outside security0 nameif ethernet1 inside security100 hostname pixfirewall fixup protocol ftp 21 fixup protocol http 80 fixup protocol h323 h225 1720 fixup...- cpace
- Thread
- Replies: 5
- Forum: Security, hacker detection & forensics
-
2 internet connections same router, 2 interfaces and firewall
I have 2 isp's on the same router and the eth0 is connected to the firewall. Ho do I load balance or load share these 2 connections ? -
LOAD BALACING methods
Please help. I have 2 isp's and 2 routers, what is the best way to get his to work. -
LOAD BALACING methods
I would like to know the same thing. I was thinking about using either bgp or eigrp. It would be for internet traffic. Sorry if this is not exactly the same as the original post. -
Configuring 2621 To Use Proper Time
How do I get NTP to work on a 1720 router ? -
NTP on a 1720
How do I set the time and allow a 1720 to use NTP ? I used the same commands I use on the 2621. NTP clock-period 17180280 ntp server 192.43.244.18 I cannot get the 1720 to recognize these commands. -
1700 connecting to Citrix via VPN
It could be all kinds of things. Make sure you are allowing ports 1494 and 1604 through the firewall or router. Also, make sure you do not check use firewall option in citrix connections and use the private addresses for the servers, not the public addresses. Besides that, you need to post more... -
Solarwinds receive errors on interface ?
What does it mean when my switch is getting an unusual amount of receive errors on one interface ?
