Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by corner9

  1. corner9

    Intuity_Audix + Telnet = Customer Services Administration?

    Besides using Terranova Terminal Emulator, DSA or ASA you could try using Dave's Telnet. Set the emulator for vt100 and after logging in use vt100 as well. It should work fine. http://sourceforge.net/projects/dtelnet/
  2. corner9

    Echo on PTP Magix

    I have 2 Magix R2 networked with a PTP T1. Location 1 is the main office and location 2 is a small office with 3 local loop-start co's. They are about 200 miles apart. The attendant at location 1 answers calls that come into the loop-start lines at location 2. There is a CVM at location 1,and...
  3. corner9

    TTI

    The real threat is that if TTI is on during upgrades or major changes software corruptions can happen. All upgrade instructions will have you disable TTI. You can also check to see if the state of TTI is okay by doing a "status tti" at the terminal. It should show that 100% of the ports are...
  4. corner9

    Magix only does full default restart

    I have a Magix R2 v9 that will only full default restart. Everytime the machine restarts the processor shows a 'F'and it comes up blank in key mode. Then I have to do a restore. Last time I added a card I had to phantom it first so the restore would take. Now I need to add a new PRI but I can...
See more

Part and Inventory Search

Back
Top