Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by coreed
-
RIP2 as Unicast
One of our customers wants our Nortel BLN router to send our RIP2 updates as a unicast announcement to the PIX as follows: ****** router rip version 2 no validate-update-source network 172.18.0.0 neighbor 172.18.0.5 no auto-summary passive-interface FastEthernet0/0 ******* The neighbour address...- coreed
- Thread
- Replies: 0
- Forum: Security, hacker detection & forensics
-
BLN - RIP as Unicast to Cisco
We have a BLN outside of a PIX Firewall. We need to route all traffic to a neigbour address as a Unicast. Our client wants our BLN set up as follows: ****************** router rip version 2 no validate-update-source network 172.18.0.0 neighbor 172.18.0.5 no auto-summary interface FastEthernet0/0...- coreed
- Thread
- Replies: 0
- Forum: Avaya (Nortel) networking solutions
-
Cannot ping hosts on same subnet
ARN router. LAN IP 192.168.40.188\23 All hosts that have a x.x.40.x address have no problems pinging them. Host that have a .x.x.41.x can only ping sporadically, even though I can see lots of .41 addresses sitting in the arp cache. If I flush the arp cache I can momentarily ping .41 addresses...- coreed
- Thread
- Replies: 2
- Forum: Avaya (Nortel) networking solutions
