Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by CoolTalkingFrog
-
Procomm Pb with inads,no login prompt !
I fixed it... All I had to do was to reset the modem board on the cabinet and all went fine. The problem now is that if I try to connect at more than 2400bps, it will answer and disconnect after a sec or so. Any ideas on how to make it working at 9600bps ? Thanks. Arno.- CoolTalkingFrog
- Post #6
- Forum: Avaya: CM/Aura (Definity)
-
Procomm Pb with inads,no login prompt !
Hello Guys, Thank you for the replies. I have an internal modem, which is the same one I used to used. It worked fine at the time. I am going to check the login permissions, just in case. My Procomm settings seem to be fine: 9600 Bps (Also tried up to 1200) 8-N-1 The modem seems fine... The...- CoolTalkingFrog
- Post #5
- Forum: Avaya: CM/Aura (Definity)
-
Procomm Pb with inads,no login prompt !
Hello, I used to be able to access my definity G3R using Procomm (ATT4410) and a modem through the inads port. Now, when I call, the modem on the definity will answer (fax like tone) and then connect. However, it does not prompt me for the login and password anymore. All I have is "Procomm...- CoolTalkingFrog
- Thread
- Replies: 6
- Forum: Avaya: CM/Aura (Definity)
