Recent content by cms18

Thanks I plan on upgrading over the weekend. Just wanted to check, this is the first time that the system has rebooted on its own (installed 2 ½ years ago).

Hi everyone, Can someone tell me what the following error means: 1799232mS PRN: +++ START OF ALARM LOG DUMP +++ 1799232mS PRN: ALARM: 08/03/2007 13:05:42 IP 412 3.2(54) <TLB Data Load Error> CRIT RAISED addr=46414449 d=12 pc=009aa5dc 01cdbf1c 009b371c 00abb814 00abbb78 00ab3714...

Sounds like it is probably the provider blocking it. The service providers I have this working with are in the US, not sure if that makes a difference in the way PRIs work.

We have this set up on our IPO and it works well. For example, my extension is 4320. I created short code 4330, using the following parameters: Code: 4330 Feature: Dial3K1 Telephone number: 5557771212ss Line Group ID: 0 For the telephone number, enter the external number, followed by ss...

I don't have 3.2, but here's 3.1: www.catalysttelecom.com/downloads/IP_Office_Matrix_3-1.xls

Thanks. Installed the Fax Finder 2 port unit this week and it works great with the IPO.

I have 3.2 running on our 403 also with VM Pro, haven't run into any problems yet.

Hi, I am looking into a fax solution for our IP Office 412 (with T1 and PRI). We've looked at several products, including MultiTech's FaxFinder and GFI Faxmaker. I was wondering if anyone has had experience with either and if one is better than the other as far as integration with the IP...

I've noticed the same thing. In my case I have a VMPro call flow using an assisted transfer for Meet Me Conferencing. I have a 412 on 3.1.65. As callers dial in and are passed into the conference I notice the ?? in Call Status. Used to work on previous releases (I think 3.0), but since going to...

Are you running Exchange 2003 with Outlook 2003? Seemed to work fine with Outlook XP, but with 2003 didn't work, may be a few more settings that I may have missed.

I ran the update to 3.1(65) on both systems over the weekend and there was no change. As far as looking up the SCN sites in Sys-Monitor, I do see both. When monitoring the 412 site I see data for RIP Send / Receive Count and Advertised. When monitoring the 403 site all I see is data for RIP...

I’ve been noticing in our SCN (running over a VPN) that the user directory information doesn’t sync across sites anymore. This information used to sync on an older release and over the same VPN. You can place calls back and forth with no problem. The main site is an IPO 412 3.1(56) and the...

I ran into a similar problem last year with our IPO 403 & VMPro. It was also running off of a brand new Dell XP Pro w/ SP2. VMPro was the only thing running off of the machine and it would lock up every few days requiring a restart. We resorted to reformatting the hard drive and reloading the...

I would also like a copy. cms2045 at gmail.com thanks.

There are also a couple of settings on the Telephony tab under the System Configuration. Under this tab, make sure Inhibit off-switch calls is not checked and that Allow outgoing transfer is checked.