Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by cmawbey

  1. cmawbey

    Get Patch to Rls 24.24 Meridiam option 11C

    contact FirebirdScrambler he may have it
  2. cmawbey

    overlay LD 3 to LD 9

    No those overlays are not used.....
  3. cmawbey

    an old thread i cant reply in has something i need

    contact firebirdscambler he is on this site......i am sure he can help you http://www.linkedin.com/in/davidbromley
  4. cmawbey

    Block All Outgoing Calls from One Extension

    not sure if you can bar internal calls but you can make these changes the CLS The seven Class of Service types are:- UNR - Unrestricted The extension user can dial anywhere they want - literally without restriction. FRE - Fully Restricted No exchange line access. The extension user can make...
  5. cmawbey

    Printing an inventory list?

    ld 81 lst 0 feat = sets
  6. cmawbey

    Meridian 11C

    you will need the level 2 password to do that...
  7. cmawbey

    Meridian Mail issue: cannot access or do anything

    Try this,,, at the mail screen Try CTRL + BTB, you should get >> prompt type KILL 2 at the >> prompt and the system should reboot If that doesn't work...this one will (always work) hold down the CTRL key and enter BTB pause half a second then KIL (still holding down the CTRL key)
  8. cmawbey

    BCM 50 locked up

    could be, if you have a current backup, then i would go into EM and reboot the system....
  9. cmawbey

    remove forwarding on NOortel OPC 11

    LD 20 req chg type 2008 Cust 0 TN 7 15 echg yes item hunt xxxx item fdn xxxx C/R through till you get req req end
  10. cmawbey

    remove forwarding on NOortel OPC 11

    no.. print the TN.. you will need to change HUNT & FDN
  11. cmawbey

    Hunt Group calls on BCM400 do not get forwarded

    hmmm on second thoughts maybe not what you want
  12. cmawbey

    Hunt Group calls on BCM400 do not get forwarded

    Have you tried DND F85 to cancel F#85... may work...
  13. cmawbey

    Unequipped TN

    first you need to find a spare number for the DN then find a set to copy from... to find a spare number LD 20 req prt type ludn ( list unused dn's) cust 0 dn C/R this will print all the spare numbers, choose one.. e.g 1234 then find a set to copy from this needs to be the same set type as the...
  14. cmawbey

    BCM50 reset

    do u not have you keycode file...

Part and Inventory Search

Back
Top