Recent content by Chuck888

Got a back-lit EU24 and plugged it into a 5621 (x135). Phone restarted, EU24 lites up, I see the colons down the side of the display, and I can switch back and forth between the 2 pages. I used Manager to add 2 "dial" buttons on the EU24. The labels do not appear in the display. If I push the...

Yes we have IP and Digital phones. What does the VCM card do? This module was a 700431778 IPO IP500 EXTN CARD PHONE 2 PCS04 M107-2... So it actually had 2 PHONE ports on it also. I removed the PRI "daughter board"(?) from this module and put it on the new module 700417330 DIG 8.

SUCCESS!! Thank you very much! Always a little scary when I'm working on something I'm unfamiliar with that could shut the whole business down. Thanks again for your help.

I'm replacing it because I need more digital ports. This module has nothing but the PRI board in it, so now I'll have 8 more digital ports.

Wow you guys are really fast! Great! Actually I'm replacing the module that contains the PRI card, so I have to remove the PRI board from the old module and install it on the new one (700417330 - DGTL STA 8). Are there any special tricks to removing and installing the PRI card or should that be...

foneman1 So I use manager to Shutdown, then to restart I just plug the power cable back in and it will power up? Thank you all very much for the input.

I'm new to working on IP Office. I need to replace a module. We're using IP Office 500 V2 version 8.0 (44). All I need to do is power down, pull the old one and plug in the new one, then power it back up, but. . . how do I power it down and then power it back up? Just pull the plug? Thanks.