Recent content by chronicle

I have 10 per device access licences, with licence codes. When I go to Control Panel - Licensing the Add Client Licences window comes up but the Add and Remove licences buttons are not available. I am logged in as Administrator. How do I add these Licences? Many Thanks for any help

Hi There, I have a new server set up as a DHCP server (also DNS and Domain Controller). When I go into the DHCP Admin Tools and click Authorise it says ***active*** and when I click on the full domain name it goes to "running". At this stage I can see the application running in Task Manager, but...

I am setting up a Windows 2003 server SP2 as a domain controller, DHCP server and File server for a small network with only 4 PC's and a couple of network printers. I have 2 320GB disks set up for RAID 1. How much data is written to the Active directory log files? The Microsoft technotes suggest...

Had exactly the same problem yesterday. Ended up I salvaged a floppy from an old PC which was about to go to the dump and installed it temporarily with a ribbon cable. Took it out again when I finished. This problem has been fixed in Vista which will find the drivers anywhere, so presumably will...

Thanks for the info guys. I've ordered the SATA 11 drives as they were only about $5 more each than the SATA drives. Slightly larger too. Thanks again Rob

Hi Guys, Just need to know whether SATA-11 drives are backwards comaptible. I've read something about this recently but now can't find it. I'm about to replace an 80GB SATA drive with a couple of 320GB's running RAID 1. Motherboard is Intel D875PBZ which is a couple of years old and only as far...

Thanks for that. Will do as you advise and put the scanner on a PC. Regards Rob

Have just set up a new Windows 2003 Server as domain controller and file server. There are 3 workstations. Can I install a HP Scanjet 5590 Flatbed scanner onto the server, so that users can scan multipage documents into the file server? Are there any problems with setting it up like this? I'm...

I have a WAN setup using Pix to Pix VPN's. The two main types of traffic over the VPN's are Terminal server and File transfer using ftp. The file transfers can be quite large and the FTP grabs most of the bandwidth (2MB Frame relay) so the terminal users get a slow response while this is...