Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by ChrisvanT

  1. ChrisvanT

    stopping EDT TRACE TSP L2L3

    Dont know why I didnt think about that, thanks bud it worked!
  2. ChrisvanT

    stopping EDT TRACE TSP L2L3

    Hi Everyone, (3300 MCD4.2) I recently ran the EDT TRACE TSP L2L3 command in maintanence commands to see if the mitel is communicating with the telco as we had problems with our E1 line. now the issue is that whenever I go into maintanance commands the trace continues to run. Anybody know the...
  3. ChrisvanT

    SDS alarm/error

    Cool thanks bud, will give this a try next week. Kind regards Chris
  4. ChrisvanT

    SDS alarm/error

    How do i go about syncing? what forms will it affect? Shouldn't it sync automatically?
  5. ChrisvanT

    SDS alarm/error

    Would a sync push remove the alarm without damaging anything?
  6. ChrisvanT

    SDS alarm/error

    nope no deleting data, just did a reboot of the other controller... That is the main number on the switchboard and when doing loc num it returns: The number refers to a Non Prime Attendant Group. Will deleting that sds error have a negative effect on the system?
  7. ChrisvanT

    SDS alarm/error

    3300 4.2 Hi Guys, I've got a minor alarm from SDS and when checking it out in the SDS shared data updates form, I get this one record. I've checked it and retried it but it doesn't want to go away. The only thing thats left to do is delete the record. I would like to know if it is safe to do so...
  8. ChrisvanT

    mitel loudringer

    After weighing up all the options, I had a chat to one of our electrical engineers who said he will connect some sort of relay that will increase the power output from the speaker to the ringer. The 5485 is going to be too pricey as you need to buy an external ringer anyways, and as mentioned we...
  9. ChrisvanT

    mitel loudringer

    also will the current running through the pair from the phone speaker be enough to power a ringer that doesn't have an external power source? Thanks
  10. ChrisvanT

    mitel loudringer

    Hi Guys, thanks for the ideas, I have never seen or used a 5485, do you connect it directly to the phone? Will the phone then ring through it too or do you have to make a ring group or so? @EPearson, the conventional ringers that i have work with RJ11, so if i were to run a pair from the...
  11. ChrisvanT

    mitel loudringer

    Hello all, (3300, 4.2) I need to know if Mitel has a loudringer product/phone for a higher noise environment e.g. production to notify users easier? I currently have a couple analogue (but we dont want it coz its old) and two that work with a ATA device to convert ip to analogue for the...
  12. ChrisvanT

    Cannot access the Pickup Groups form of our lab controller

    How about a system software update?
  13. ChrisvanT

    SIP Devices on 3300 & Distorted Voice

    As i said, take a look at QoS but also double check your SIP setings as i noticed you say it only happens with the SIP clients.
  14. ChrisvanT

    SIP Devices on 3300 & Distorted Voice

    Have you taken a look at QoS?
  15. ChrisvanT

    Phoning from locked phone

    i read an old document on a 5201 stating that when a phone is locked you press 678 and then enter your pin and it will allow you to make a call, and only after 60 seconds of no activity it auto locks the phone again. I do not know on what version of software that is as it doesn't work on mine...
See more

Part and Inventory Search

Back
Top