Recent content by chrislxx

Thanks everyone I did resolve it. After changing my search terms I found the answer. I used FBUG following the instructions con the web page http://pbxbook.com/meridian/iniloop.html Thanks again Chris

Thank you I have looked for bent pins, I have removed all cards except for the scc and the power supply. Any ideas welcome and greatly appreciated. Chris

Hi Thank you for responding. I have reseated the daughter boards, the memory, and the dongle. I have also checked the PCMCIA cards. Same results. Any other ideas? Chris

Hi i just moved a working option 11 from to another (shipped it) and now it will not boot up. is there any way to recover form this? I have posted what i see below. The system has the PCMCIA cards with a backup, however we do not have the keys. thank you in advance for any help. Chris...

HI Yes I have PKG 263 Chris

Thank you for responding I changed my RCAP settings to match yours (posted below). There was no change I still only get a name display calling from the Nortel to the Asterisk. Chris ADAN DCH 22 CTYP TMDI CARD 02 PORT 1 DES TOASTERISK USR PRI DCHL 2 OTBF 32 PARM RS232...

Hi I have connected a Asterisk (11) to a Nortel Opt 11 Succession 3. The connect is TIE using QSIG. Calls are processing however there is no name display calling from the asterisk to the Nortel. Any help is greatly appreciated. Below is my Nortel configuration. Thank you in advance for any...

Thank you for responding. I did not get the option to change NCNA and NCRD in LD 16. so I deleted the RSB and recreated it, it did not prompt for those options. However now I have name display when Nortel calls Asterisk, on the asterisk.

Hi Thank you for the suggestion. i tried complexly outing the DCH and the first thing i tried was to put ND2 in the RCAP still the same error. Chris

Thank you for responding I get a SCH0531 error when I try to add ND2. SCH0531 Action: the RCAP entry point in ovl 16 has been answered NDS when QSUr QSIG GF are not accessible or with an inappropriate interface configured. Please can someone tell me what I have configured incorrectly? Chris

Hi A PRI is connected between a OPT 11 Succession 3 and a Asterisk. Calls pass OK between the 2 switches, however the name display does not pass through. I have used IFC = ISGF. Attached below is my configuration. Please tell me if i have the Nortel settings correct. Also i need the OPT11...

Thank you that was helpful!!!

We just had a failure of a power supply and none of my usual sources have this one. What is the difference between a NTDK70BBE5 and a NTDK70BB as I seem to be able to find those? Or is there another part number that will work? Or if anyone knows where I can get one in Salt Lake (the switch is...

Thank you yes ISDN is enabled in the CDB Yes i built tem as SIGO = STD and they otherwise work

Thank you is there any way to make message lights work without package 37 and useing ESN5?