Recent content by Chopsy666

Gents, i have been looking at the routers on ebay and there is a big difference in price between the 2501 fo example and the 2600 series. Is at least one 2600 reqd for CCNP or are 2501's sufficient ( i will prob use rental kits when i get to ccie stage) Lastly the 2514. I read it has 2...

Thanks Guys, Both of you have been extremely helpful, and i will take both your comments on board. Thank you

Thanks KiscoKid, Once again i humbled and apperciative of your advice. would a CCNA home lab suffice for a CCNP or do you think i should go for one of those online rack rental systems. Regards Chopsy

Hello again KiscoKid, you've helped me out on a few posts so if you remember me your probably thinking.."what this guy wants to be a CCIE" L.O.L. Well its good to know that both demand a high level of expertise in routing & switching, I think the security one is the one i would go for. I did...

Hi I am looking to start my career in networking i am planning to do a CCNA first then go straight to the CCIE. but i have to questions and wonder if anyone could help me. 1. if i do the CCIE in say security will i miss information that i would learn doing the CCNP or would i have to learn the...

Do you guys know if the following counters seem 'healthy', in terms of Broadcasts/Multicast transmissions. should they be so high or does the relation to bytes transmitted seem reasonable. Name : Link Status : Up Bytes Rx : 455,920,451 Bytes Tx : 1,660,238,275...

Thanks for your help guys. I will have a looksy and see how it goes

Hi Nogs, I have done that and the IP config does appear a duplicate so i will change that. I am getting the odd (ignore the date) :-) 05/29/90 21:45:10 ports: port E6 in half duplex, flow control is auto-disable 05/29/90 21:45:10 ports: port E6 is now off-line 05/29/90 21:45:13 ports: port E6...

Its on the Kazza network, about 36mb pdf i think.

Thanks for the reply cyberspace. Well when i try to telnet to the ip address, most of the time the console comes up with an HP 2424M, but sometimes a HP 4000M Other times telnet simply wont connect at all. the network here has kinda grown, and hence is not very well designed with some areas...

Hi, I think we have two switches on the network with the same IP address. This makes telneting to it more dificult. However does anyone know if this could be the cause, or contribute to a slow network. As switches work at layer 2 i would have thought not, but perhaps i am looking at it too...

Thanks KiscoKid, As per usual, you were most helpful, and most correct :-) Ive got another question which is slightly off topic but related to this whole 'project' Im trying to get the ISP to subnet our range e.g 193.227.234.0-255 into 4 subnets using a 255.255.255.192 mask. All packets...

Brilliant! That worked a treat! Thanks GehardR

Hello again its me, I have yet another problem, i need to now change the ip address i set as a secondary interface to another one with a different one. I believe if i follow the same insturctions as above i would just be creating another secondary interface. Does the KiscoKid or anyone else...

Hi guys, I want to upgrade my NT 4 to MCSE 2003, i have spent a lot of money on courses from Microsoft (thousands of pounds) And quite frankly have had enough. I know there are transenders and test king you can buy and an array of Books. I have the MOC from when i did the updating skills to...