Recent content by chipdip

I believe there is a LBA enabled in this computer but I have not altered these bios settings from when everything was originally in working order. Just the hard drive params. I know this Fujitsu drive is healthy because I set it to master on my pentium class computer and successfully installed...

The most robust and reliable defragger that I have had the pleasure to use is Vopt Millenium Edition. It works very fast and offers colored bar graphs with disk statistics. I defragged several tough customers that the other defraggers would lockup on or loop endlessly in restarts.

I have the controller in front of me and it is a vesa local bus type periferal with dual IDE output ( pri and sec ). It has close to 20 various jumpers and the 3-169pin chips are labeled " Winbond W83759AF, W83787F, W83758F ". PTI-265W/260W V0 and FCC ID KDDPTI265W So far I have...

You need to install DIVX drivers. You can download Divx version 4.11 here; http://www.divx.com/download/index.php Install it then play the clips again.

I was recently asked to configure a 486 for stability and internet use. When brought to me this machine was running win95 with lots of stuff they did not want. A 486dx4-120 with 32 megs of ram and a 1.5 gig Fujitsu drive. Before formatting and installing 98 I noted the hardware and other...

Unless you are ghosting your current IDE drive you will have to re-install most applications on the new SCSI. Have you adjusted your CMOS settings for the presence of the SCSI and if so have you slaved and mastered them when using them together in your computer. Two masters may cause your...

Updates are available here; http://www.roxio.com/en/jhtml/support/webcheckup.jhtml

It might be a good idea to check the network card in all 3 pc's to make sure they are firmly seated in their slots on the respective motherboards. Are you using a hub. If so you should look at the modular plugs entering the hub for damage or if one is not pushed in far enough. Examine the...

If you have access to Windows Millenium and you would like to speed up the defrag you can delete the 98 defrag, replace it with millenium defrag and rename it to defrag. It's basically the same thing but a lot faster.

This may sound obvious but did you check the jumpers in the back of your hd's to make sure the slave and master are selected accordingly ? I have also seen drives that were not happy sharing a computer with certain other brands.

Here are some more : http://www.digital-digest.com/dvd/downloads/encoding.html#ac3utils Good luck.

A few free avi editing tools here ; http://www.sumrallworks.com/freebies/buttonhole/multimedia/avi/editor.htm I do not know if any of these can rotate the clip.

If it is practical for you and in light of the fact that you may have accidentally deleted a vital file I would suggest moving your critical data to safe location and performing a format and reinstalling to rule out hardware failure. Before resorting to this extreme measure I would check the...

Certain makes of printers are known to interfere with scanners at a hardware level. Do you have a printer connected directly to your scanner, is this a usb scanner ?

I have once overcome this read limitation by altering the setting in the control panel>system properties>performance>file system>CDrom Change the setting from quad-speed to " no read-ahead ". Good luck.